| Cleaning Width | 2.5 - 3.5m Adjustable |
|---|---|
| Life Span Exceeds | 25,000 Loops |
| Pressure Resistance Of The Pipeline System | >0.55MPa |
| Pipe System Pressure Resistance | >0.55MPa |
| The Water Saving Rate Reaches | 20%-30% |
| Conform To; Comply With; Accord With | ISO 9001 Certification |
|---|---|
| High Precision | CNC Machining |
| Temperature Resistance | - 40°C-120°C |
| Salt Spray Test | >1000 Hours |
| Model | 1608-00148 |
| Compressive Strength | Work Pressure 0.8 - 1.2MPa |
|---|---|
| Volume Parameters | Total Volume 5.5L |
| Service Life | ≥12000 Hours |
| Pressure Drop | ≤0.05MPa |
| Air Pressure Test Leakage Volume | ≤0.5ml/min |
| Adopt | Dual-contact Temperature Sensing Bulb |
|---|---|
| Wear-resistant Life | ≥100,000 Times Of Adjustment Cycles |
| Adapt To The Daily Average | ≥150 Start-stop Operations |
| Operating Temperature Range | - From 40℃ To 80℃ |
| Heat Transfer Efficiency | Increase By 20% |
| Stability | Maintain The Stability Of The Vehicle Body Posture |
|---|---|
| Durability | After 1 Million Cycles Of Fatigue Testing |
| Carrying Capacity | Load - Bearing Capacity Of Over 5 Tons |
| Vehicle Model Adaptation | Youth Neoplan JNP6126, Etc. |
| Stiffness Characteristics | Variable Stiffness Design |
| Pass; Adopt; Approve | 10 - 500Hz Swept - Frequency Vibration Test |
|---|---|
| Adopt | 304 Stainless Steel Stamping Valve Core |
| The Lifespan Reaches | More Than 500,000 Times |
| Support | Dual-coil Control |
| Electromagnetic Interference Resistance | CLASS Level 5 |
| Quality Commitment | Inspection One By One, With A Pass Rate Of 100% |
|---|---|
| Accessory Type | Commercial Vehicle Air Conditioning Accessories |
| Temperature Sensing System | Charging Type Temperature Sensing Bulb |
| Packaging | Carton, Wooden Box, Custom Packaging |
| Model | Air Conditioner Expansion Valve |
| Work In The Full Temperature Range | Stable Operation In An Environment Ranging From -40℃ To 85℃ |
|---|---|
| Pressure Drop Control | Initial Pressure Drop At Rated Air Volume ≤ 2kPa |
| Quality System | Produced By IATF 16949 Certified Factories |
| Precise Matching | Original Factory Number 1109-08269 |
| Dust Holding Capacity | Static Dust Holding Capacity ≥ 300g |
| Motor Configuration | 24V Permanent Magnet Synchronous Motor |
|---|---|
| Air Volume And Air Pressure | Rated Air Volume 2500m³/h |
| Noise Control | No-load Noise ≤ 68dB (A) |
| Protection Level | IP55 Dustproof And Waterproof |
| Impeller Material | High-strength Aluminum Alloy Die-cast Impeller |
| Special Rubber Composite Layer | Oil-resistant/Ozone-resistant/Aging-resistant Formula |
|---|---|
| Transient Temperature Rise Suppression | Operating Temperature Range: -40℃ To +120℃ |
| Multi - Directional Damping Structure | Suppress Multi - Axis Vibration Transmission |
| Memory Alloy Limit Ring | Temperature Adaptive Deformation Recovery |
| Modular Interface | Quick - Detachable Clamp Connection |