| Lubrication Design | Automatic Lubricating Mechanism |
|---|---|
| Maintenance Cost | The Pump Sleeve Can Be Replaced. |
| Technical Certification | WABCO Global Standards |
| Product Model | 1604-00868 9700516080 |
| Sealing Technology | New Type Exhaust Valve |
| Anti-vibration Performance | 10g Acceleration Test. Passed ISO 16750-3 Road Vibration Test. |
|---|---|
| Thread Technology | Cold Heading Forming + Thread Rolling Treatment |
| Tensile Strength | 10.9 Grade High-strength Certification |
| Anti-jamming Processing | Molybdenum Disulfide Coating |
| Resistant To Low Temperature | -40℃ Anti-brittle Cracking |
| Shell | ADC6 Aluminum Alloy |
|---|---|
| Built-in | Heating Module |
| Lifespan | Long-life Design |
| Wide Temperature Operating Range | -40℃~+85℃ |
| Heat | Intelligent Temperature Control |
| Intelligent Sleep | The Vehicle Automatically Enters Sleep Mode After Being Stationary For 15 Minutes. |
|---|---|
| Communication Specifications | Operating In The 433.92±0.05MHz SRRC Approved Frequency Band |
| Alarm Response | The Response Time For Rapid Air Leakage Detection Is ≤ 5 Seconds |
| Material Technology | The Shell Is Made Of PA66 + 30% Glass Fiber Reinforced Material |
| Protection Level | Sensor Body IP6K9K Dustproof And Waterproof |
| Maintain Features | Maintenance - Free Design |
|---|---|
| Vehicle Model Adaptation | Cover Large Buses |
| Fatigue Life | GB/T 13061-2017 |
| Carrying Capacity | 1.5 KN - 6.5 KN |
| Material | Rubber Air Bag |
| Packaging | Carton, Wooden Box, Custom Packaging |
|---|---|
| Structural Design | Precision Gear And Rack Transmission |
| Lubrication Method | Long-term Grease Lubrication |
| Materials | High-strength Steel Shell |
| Model | Steering Gear Assembly |
| Model | HZ723 HY723 3502-00609 3502-00608 |
|---|---|
| Shell Material | High-strength Aluminum Alloy |
| Vibration Resistant | 10~500Hz, Acceleration 20g |
| Lubrication System | Lithium-based Grease |
| Worm Gear And Worm Materials | 42CrMo Alloy Steel |
| Inside | Magnetic Steel |
|---|---|
| Durability | Strict Testing |
| Threaded Interface | M18×1.5 |
| Brand | VDO |
| Output Signal | Pulse |
| Physical Properties | High Hardness |
|---|---|
| Material | Alloy Cast Iron |
| Temperature Resistance Range | -40℃~+150℃ |
| Dynamic Sealing Pressure | 0.2-0.5MPa |
| Salt Spray Test | 1000 Hours |
| Process Optimization | Adopt Secondary Vulcanization Molding Technology |
|---|---|
| Material Composition | Using Ethylene Propylene Diene Monomer Rubber |
| Self-lubricating Design | The Inner Wall Is Sprayed With A PTFE Coating |
| Temperature Characteristics | Operating Temperature Range -40℃ To 120℃ |
| Environmental Adaptation | Passed 500-hour Ozone Aging Test |