| Inside | Magnetic Steel |
|---|---|
| Durability | Strict Testing |
| Threaded Interface | M18×1.5 |
| Brand | VDO |
| Output Signal | Pulse |
| Physical Properties | High Hardness |
|---|---|
| Material | Alloy Cast Iron |
| Temperature Resistance Range | -40℃~+150℃ |
| Dynamic Sealing Pressure | 0.2-0.5MPa |
| Salt Spray Test | 1000 Hours |
| Process Optimization | Adopt Secondary Vulcanization Molding Technology |
|---|---|
| Material Composition | Using Ethylene Propylene Diene Monomer Rubber |
| Self-lubricating Design | The Inner Wall Is Sprayed With A PTFE Coating |
| Temperature Characteristics | Operating Temperature Range -40℃ To 120℃ |
| Environmental Adaptation | Passed 500-hour Ozone Aging Test |
| Temperature Range Adaptation | Operates In The Full Temperature Range From -40℃ To 120℃ |
|---|---|
| Steel Plate Adaptation | Designed Specifically For 10-12 Leaf Spring Plates |
| Fatigue Life | After 500,000 Alternating Load Tests |
| Department Structure | Integrally Forged U-shaped Head |
| Fixing Method | Matching 12-level Hexagon Nut |
| Precise Adaptation | Original Factory Number 1601-00632 |
|---|---|
| Fatigue Life | After 100,000 Braking Cycles |
| Thermal Fatigue Test | After 1000 Cycles Of Testing At 100℃-120℃ |
| Medium Resistance | Resistant To DOT4 Brake Fluid Immersion For 168 Hours |
| Dynamic Response | 90% Of The Standard Pressure Is Established Within 0.3 Seconds |
| Vane-type Hydraulic Pump | Efficient And Stable, With Low Noise And Long Service Life |
|---|---|
| Electric Drive | Powered By The Vehicle's High-voltage Battery |
| Motor Interface | High-voltage Waterproof Connector |
| Motor Speed | 3000-6000rpm |
| Original Factory Part Number | 2121-00041 |
| Core Structure | Dual-coil Electromagnetic Control + Friction Plate Clutch Mechanism |
|---|---|
| Material Composition | High-strength Cast Iron Shell + Aluminum Alloy Heat Sink Plate |
| Accessory Type | Rear-mounted Three-speed Electromagnetic Fan Clutch |
| Torque Output | Maximum Transmitted Torque ≥ 180N・m |
| Suitable Shaft Diameter | Standard 38mm/42mm Two Specifications |
| Accessory Type | Float-type Liquid Level Detection Sensor |
|---|---|
| Installation Specifications | M16×1.5 Standard Mounting Thread |
| Sealing Process | Single-loop O-ring Seal |
| Output Signal | Switch Signal |
| Original Factory Code | 3825-00009 |
| Quality Commitment | Inspection One By One, With A Pass Rate Of 100% |
|---|---|
| Packaging | Carton, Wooden Box, Custom Packaging |
| Accessory Type | Transmission Accessories |
| Model | QC4000-02,2214-00146 |
| Applicable Scenario | Bus Transmission Shaft |
| Carrying Capacity | Load - Bearing Capacity Of Over 5 Tons |
|---|---|
| Advantages | Height Adjustable |
| Seal Material | Fluororubber |
| Failure Testing | ≥3 Millions |
| Style | Air Bellows |