Temperature Control | Two-zone Independent Adjustment |
---|---|
Energy Saving | Standby Power Consumption ≤ 1W |
Accessory Type | Air Conditioning Control Panel |
Product Model | KFD28K-074E1 8112-01066 |
Pattern | Fifth Gear Wind Outlet Switch |
Length | L=250mm,L=275mm |
---|---|
Shaft Diameter | Φ35mm,Φ40mm |
Damping Coefficient | 10~12N・s/mm |
Base Material | 40Cr Alloy Steel |
Critical Speed | ≥8000r/min |
Rated Working Pressure | Adjustable According To Vehicle Type And Load |
---|---|
Rubber Composite Materials | Natural Rubber + Synthetic Rubber |
Vehicle Model Adaptation | Commercial Vehicles |
Fatigue Life | ≥300 Million Cycles |
Installation Method | Bolt-fixed Type |
Anti-corrosion Treatment | Anodizing + Electrophoretic Coating |
---|---|
Sealed Structure | Double-layer Fluororubber O-ring |
Main Materials | Aviation-grade Aluminum Alloy |
Connecting Thread | M14×1.5/M16×1.5/M18*1.5 |
Certification Standards | IATF 16949/QC/T 771-2017 |
Crankshaft Material | 40Cr High Frequency Quenching |
---|---|
Applicable Scenario | Bus Air Conditioning System |
Accessory Type | Air Conditioner Compressor |
Sealing Technology | Laser Welding + O-ring |
Packaging | Foam, Carton |
Spring Material | 60Si2MnA Alloy Steel |
---|---|
Diaphragm Fatigue Life | 500,000 Loops Without Damage |
Diaphragm Material | Nitrile Rubber Composite Fabric |
Certification Standards | ISO 9001/GB 12676 |
Environmental Temperature Range | -40℃~+85℃ |
Cycle Life | 50,000 - 100,000 Repetitions Of Opening And Closing |
---|---|
Temperature Range | - From -40℃ To 85℃ |
Itinerary | 10mm - 20mm |
Good Compatibility | Various Buses |
Shell | Metal/Plastic |
Surface Hardness | HRC58-62, Wear Resistant. |
---|---|
Flow Characteristics | Nominal Diameter Φ6mm |
Service Life | ≥5 Years / 150,000 Cycles |
Accessory Type | Pneumatic Accessories |
Material Composition | 42CrMo Alloy Steel |
Threaded Interface | G1/4"、M10×1 |
---|---|
Operating Temperature | 40℃ - +125℃ |
Detection Range | 0 - 16bar |
Operating Voltage | DC 24V |
Measurement Accuracy | ±0.2bar |
Installation Location | The Top Of The Air Shock Absorber Spring |
---|---|
Maintenance Convenience | The Structure Is Reasonably Designed |
Connection Method | Standard Bolt Hole Positions |
Material Composition | High-strength Steel |
Durability | Strict Fatigue Test |