| Quality Commitment | Inspection One By One, With A Pass Rate Of 100% |
|---|---|
| Packaging | Carton, Wooden Box, Custom Packaging |
| Accessory Type | Transmission Accessories |
| Model | QC4000-02,2214-00146 |
| Applicable Scenario | Bus Transmission Shaft |
| Carrying Capacity | Load - Bearing Capacity Of Over 5 Tons |
|---|---|
| Advantages | Height Adjustable |
| Seal Material | Fluororubber |
| Failure Testing | ≥3 Millions |
| Style | Air Bellows |
| Suspension Type | Air Spring,Air Bellow |
|---|---|
| Adapt | Mercedes-Benz Bus |
| Structural Design | Maintenance-free |
| Advantages | Height Adjustable |
| Product Material | Natural Rubber |
| Temperature Adaptation | Operating In The Full Temperature Range From -40℃ To 85℃ |
|---|---|
| Environmental Design | Dacromet Coating Does Not Contain Hexavalent Chromium |
| Material Composition | Adopt Q345B Low-alloy High-strength Steel |
| Shock Resistance | Can Withstand 100g Half-sine Wave Impact |
| Vibration Test | Pass The 5-2000Hz Random Vibration Test |
| High Temperature Stability | 250 ℃ High Temperature Compression Permanent Deformation Rate ≤ 1.5% |
|---|---|
| Temperature Range | -40 ℃ To 125 ℃ Full Temperature Range Operation |
| Carrying Capacity | Rated Transmission Torque 1200N ・ M |
| Identification And Traceability | Pressure Plate Hub Laser Etching Model |
| Main Material | HT250 Gray Cast Iron Material |
| Function | Precisely Detect The Vehicle Speed |
|---|---|
| Installation Location | Beside The Gearbox |
| Precision | Relatively High |
| Type | Hall Type |
| Voltage | 6.5 - 16V |
| Temperature Control | Two-zone Independent Adjustment |
|---|---|
| Energy Saving | Standby Power Consumption ≤ 1W |
| Accessory Type | Air Conditioning Control Panel |
| Product Model | KFD28K-074E1 8112-01066 |
| Pattern | Fifth Gear Wind Outlet Switch |
| Length | L=250mm,L=275mm |
|---|---|
| Shaft Diameter | Φ35mm,Φ40mm |
| Damping Coefficient | 10~12N・s/mm |
| Base Material | 40Cr Alloy Steel |
| Critical Speed | ≥8000r/min |
| Compatible With Multiple Vehicle Models | Applicable To Buses, Public Transportation Vehicles, Tourist Coaches, Etc. |
|---|---|
| Quick Response | Adjust The Speed At The Millisecond Level |
| High Tightness | Special Process Treatment |
| Corrosion Resistance | Special Coating Treatment |
| Material | High-elasticity Rubber |
| Rated Working Pressure | Adjustable According To Vehicle Type And Load |
|---|---|
| Rubber Composite Materials | Natural Rubber + Synthetic Rubber |
| Vehicle Model Adaptation | Commercial Vehicles |
| Fatigue Life | ≥300 Million Cycles |
| Installation Method | Bolt-fixed Type |