| Model | 3412-00153 |
|---|---|
| Adopt | 40Cr |
| Tensile Strength | ≥650MPa |
| Industry | Integral Forging Process |
| Hardened Layer | 0.8-1.2mm |
| Easy To Maintain | The Design Life Of The Brush Assembly Is ≥ 150,000 Kilometers |
|---|---|
| Protection Level | The Entire Machine Has IP54 Dust And Water Resistance Rating |
| Material Technology | The Shell Is Made Of ADC12 Aluminum Alloy By Die Casting. |
| Speed Characteristic | Idle Condition (800±50r/min) Output ≥ 60A |
| Efficiency Performance | Efficiency ≥ 85% At 75% Load |
| Temperature Range | Operates In The Full Temperature Range From -40℃ To 125℃ |
|---|---|
| Life Expectancy Indicator | The Fatigue Life Of The Whole Machine Is ≥ 100,000 Cycles |
| Core Structure | Brushless Permanent Magnet Design |
| Surface Treatment | Anodizing + Electrophoretic Coating |
| Adjustment Accuracy | Voltage Regulation Accuracy ±0.3V |
| Threaded Interface | G1/4"、M10×1 |
|---|---|
| Operating Temperature | 40℃ - +125℃ |
| Detection Range | 0 - 16bar |
| Operating Voltage | DC 24V |
| Measurement Accuracy | ±0.2bar |
| Installation Location | The Top Of The Air Shock Absorber Spring |
|---|---|
| Maintenance Convenience | The Structure Is Reasonably Designed |
| Connection Method | Standard Bolt Hole Positions |
| Material Composition | High-strength Steel |
| Durability | Strict Fatigue Test |
| Connection Mode | Quick Coupling / Threaded Connection / Customizable |
|---|---|
| Overload Protection | Built-in Safety Valve |
| Product Model | 1604K0324001 |
| Applicable Scenario | Bus, Sany Crane |
| Drive Type | Hydraulic Assist |
| Lubrication System | Long - Acting Lithium - Based Lubricating Grease |
|---|---|
| Working Principle | Double Universal Joint Transmission |
| Sealed Structure | Double Lip Fluororubber Oil Seal |
| Connection Method | Integrally Forged Flange Plate |
| Itinerary Range | Telescopic Amount ±20mm |
| Skeleton | Cathodic Electrophoretic Diamond Wire Mesh |
|---|---|
| Typical Dimensions | Outer Diameter Φ250mm × Height Φ460mm |
| Vibration Resistance Performance | 10 - 500Hz Sweep Frequency Vibration Test |
| Filter Paper | Imported Composite Fiber Filter Paper |
| Transportation Protection | Compressive Strength ≥ 500N |
| Material Composition | Chloroprene Rubber + Cord Reinforcement Layer |
|---|---|
| Shock Absorption Characteristics | Air Damping Shock Absorption |
| Load Range | Adapt To 12-meter Buses |
| Sealing Performance | Multi - Layer Sealed Lips |
| Application Scenarios | Bus Shock Absorption |
| Installation Method | Threaded Connection M22×1.5 |
|---|---|
| Switch Type | Integrated Contactless Switch |
| Control The Temperature Range | 75 - 85℃ Can Be Customized |
| Service Life | ≥10000 Times |
| Insulation Resistance | >100MΩ |