| Salt Spray Protection | 5% NaCl Solution Salt Spray Test For 48 Hours |
|---|---|
| Vibration Resistance | Pass The 10-2000Hz Random Vibration Test |
| Electrical Parameters | Operating Voltage 24V DC |
| Intelligent Adjustment | Support Automatic Mode |
| Energy-saving Control | Idle State (≤800r/min) |
| Material Composition | The Cylinder Block Is Made Of 6061 - T6 Aluminum Alloy. |
|---|---|
| Protection Level | IP67 Level Dustproof And Waterproof |
| Power Adaptation | Compatible With 12 - 24V DC |
| Response Speed | Startup Time ≤ 0.3 Seconds |
| Intelligent Anti-pinch | Built-in Pressure Sensor |
| Overload Protection | Bimetallic Strip Thermal Protection |
|---|---|
| Installation Method | Quick-insert Terminal |
| Rated Load | 30A@14V DC |
| Extreme Environment | -40℃ To 85℃ |
| Mechanical Life | ≥10⁷ Times |
| Salt Spray Test | 1000 Hours Without Substrate Corrosion |
|---|---|
| Bolt Grade | 10.9 Grade High-strength Steel |
| Material | Alloy Structural Steel |
| Compatible Vehicle Models | 10-18 Meter Buses |
| Fatigue Life | ≥500,000 Cycles |
| Adapt To | - Wide Temperature Range Environment From - 40℃ To 80℃ |
|---|---|
| Protection Level | IP65 Dustproof And Splash-proof |
| Brand Compatibility | Jinlong / Higer / Zhongtong |
| Safety Level | B+ Level Anti-theft Standard |
| Key Insertion And Extraction Lifespan | ≥100,000 Times |
| Durability | Pass The 2000 - Hour Continuous Load Test |
|---|---|
| Control Method | Full Electronic Voltage Regulator |
| Core Functions | Integrated Generator |
| Operating Temperature | -40℃ To + 125℃ |
| Fault Response Time | ≤100ms |
| Output Signal | Digital Quantity Signal |
|---|---|
| Store Temperature | -50℃~+100℃ |
| Voltage | 24V DC |
| Rated Current | ≤50mA |
| Power Consumption | ≤1.2W |
| Environmental Adaptability | Wide Temperature Range (-40℃~+80℃) |
|---|---|
| Compliance Standards | ISO 16750-3/GB/T 18230 |
| Interface Compatibility | Standard Spline Shaft |
| Material | High-strength Shell |
| Applicable Scenario | Transmission Parts |
| Low Friction Design | Copper-based Self-lubricating Bushings Are Used, And The Friction Coefficient Is ≤ 0.08. |
|---|---|
| Security Authentication | The Support Assembly Passes The 1.5 Times Static Load Test |
| High-precision Cooperation | Tolerance Of Rocker Arm Shaft Hole ±0.01mm |
| Wide Temperature Adaptability | Operating Temperature Range - 40℃~120℃ |
| Install | Dedicated Car Customization Interface |
| Contact | Silver Alloy Contacts Have Good Conductivity And Are Wear-resistant. |
|---|---|
| Adaptation | Adapt To Multiple Passenger Door Systems Of Coaches. |
| Packaging | Carton, Wooden Box, Custom Packaging |
| Flame Retardant | Flame Retardant Material Manufacturing |
| Material | High-quality Engineering Plastic Casing |