| Size Specifications | Nominal Diameter φ23mm, Effective Thread Length 94mm, Total Length 104mm |
|---|---|
| Temperature Adaptation | Works In The Full Temperature Range From -50℃ To +150℃ |
| Vibration Test | Pass The 5-2000Hz Random Vibration Test |
| Material Composition | Adopt 42CrMo High-strength Alloy Steel |
| Torque Requirements | Installation Torque Range 200-250N・m |
| Temperature Adaptation | Operates In The Full Temperature Range From -40℃ To 125℃ |
|---|---|
| Environmental Testing | -40℃ To 125℃ High And Low Temperature Cycle Test |
| Material Composition | The Main Body Is Made Of A356 Aluminum Alloy |
| Load Capacity | Static Torque Bearing Capacity ≥ 850N・m |
| Vibration-resistant Design | Built-in Rubber Shock-absorbing Bracket |
| Material Technology | The Shell Is Made Of ADC12 Aluminum Alloy By Die Casting. |
|---|---|
| Electrical Specifications | Rated Voltage 28V DC, Output Power 150A |
| Electromagnetic Compatibility | Radiated Disturbance ≤ 30dBμV/m |
| Speed Characteristic | Idle Condition (800±50r/min) |
| Efficiency Performance | Efficiency ≥ 88% At 75% Load |
| Diagnostic Function | Compatible With UDS (ISO 14229) Diagnostic Protocol |
|---|---|
| Material Technology | Using ADC12 Aluminum Alloy Die-cast Housing |
| Communication Performance | Bus Speed: 500kbps/1Mbps, Adjustable |
| Environmental Adaptation | Operating Temperature -40℃ To +85℃ |
| Anti-interference Design | Built-in EMC Filter Circuit |
| Material Composition | The Rolling Elements Are Made Of GCr15 High-carbon Chromium Bearing Steel |
|---|---|
| High Temperature Durability | 120℃ Constant Temperature Test For 1000 Hours |
| Temperature Adaptation | -40℃ To 120℃ Wide Temperature Range |
| Response Characteristics | Separation Lag Time ≤ 0.2 Seconds |
| Adaptation Specifications | Eaton Automatic Transmission |
| Working Condition Adaptation | Designed Specifically For The Frequent Starts And Stops Of Urban Public Transport |
|---|---|
| High-temperature Durability | 130℃ Constant Temperature Durability Test For 400h With No Performance Drift |
| Wide Temperature Operation | Stable Operation Over The Entire Temperature Range From -40℃ To 125℃ |
| Response Speed | The Response Time To Sudden Changes In Rotational Speed Is ≤ 5ms |
| High Temperature Durability | 130℃ Constant Temperature Durability Test For 400h |
| Salt Spray Protection | 5% NaCl Solution Salt Spray Test For 48 Hours |
|---|---|
| Vibration Resistance | Pass The 10-2000Hz Random Vibration Test |
| Electrical Parameters | Operating Voltage 24V DC |
| Intelligent Adjustment | Support Automatic Mode |
| Energy-saving Control | Idle State (≤800r/min) |
| Material Composition | The Cylinder Block Is Made Of 6061 - T6 Aluminum Alloy. |
|---|---|
| Protection Level | IP67 Level Dustproof And Waterproof |
| Power Adaptation | Compatible With 12 - 24V DC |
| Response Speed | Startup Time ≤ 0.3 Seconds |
| Intelligent Anti-pinch | Built-in Pressure Sensor |
| Overload Protection | Bimetallic Strip Thermal Protection |
|---|---|
| Installation Method | Quick-insert Terminal |
| Rated Load | 30A@14V DC |
| Extreme Environment | -40℃ To 85℃ |
| Mechanical Life | ≥10⁷ Times |
| Salt Spray Test | 1000 Hours Without Substrate Corrosion |
|---|---|
| Bolt Grade | 10.9 Grade High-strength Steel |
| Material | Alloy Structural Steel |
| Compatible Vehicle Models | 10-18 Meter Buses |
| Fatigue Life | ≥500,000 Cycles |