| Precise Adaptation | Original Factory Number 1601-00632 |
|---|---|
| Fatigue Life | After 100,000 Braking Cycles |
| Thermal Fatigue Test | After 1000 Cycles Of Testing At 100℃-120℃ |
| Medium Resistance | Resistant To DOT4 Brake Fluid Immersion For 168 Hours |
| Dynamic Response | 90% Of The Standard Pressure Is Established Within 0.3 Seconds |
| Quick-release Structure | The Filter Element Adopts A Clip-on Installation, And The Replacement Time Is ≤ 5 Minutes |
|---|---|
| Long-lasting And Durable | The Overall Simulated Service Life Of The Set Of Racks Is ≥ 30,000 Kilometers |
| Precise Adaptation | Designed Specifically For Yutong E12, CL6, And T7 New Energy Buses |
| Packaging Protection | Vacuum-sealed Packaging + Moisture-proof Buffer Box |
| Original Factory Traceability | Each Set Comes With A Unique QR Code |
| Material Technology | High-strength Cast Iron Main Body + Precision Steel Shaft Core |
|---|---|
| Original Factory Adaptation | Xiamen King Long Coach (Golden Dragon XML Series) |
| Mute Design | The Wheel Groove Adopts A Special Arc Design |
| Security Guarantee | Double Sealing Structure |
| Applicable Temperature Range | -40℃ To +120℃ |
| Material Technology | The Shell Is Made Of Flame-retardant ABS Engineering Plastic. |
|---|---|
| Full Product Name | Rear Hatch Activation Switch Control Box Assembly |
| Interface Configuration | Standard 6-8 Pin Waterproof Connector |
| Control Method | Operated By A Rocker Switch Or Button |
| Electrical Parameters | Standard 24V DC Power Supply |
| E | Ground Terminal, Connected To The Vehicle Body Or Engine Housing |
|---|---|
| Shell | High-temperature Resistant Flame-retardant Plastic |
| F | Connect The Excitation Winding Of The Generator |
| B+ | Connect The Positive Pole Of The Battery |
| High-precision Control | Voltage Regulation Accuracy ≤ ±0.2V |
| Vane-type Hydraulic Pump | Efficient And Stable, With Low Noise And Long Service Life |
|---|---|
| Electric Drive | Powered By The Vehicle's High-voltage Battery |
| Motor Interface | High-voltage Waterproof Connector |
| Motor Speed | 3000-6000rpm |
| Original Factory Part Number | 2121-00041 |
| Overload Protection | Automatically Relieve Pressure When The Air Pressure Exceeds 1MPa |
|---|---|
| Main Airbag Module | Provide Seat Suspension And Shock Absorption Function |
| Structural Strength | The Overall Design Load-bearing Capacity Is ≥ 200kg |
| Manual Adjustment | Control Knobs Are Set On The Side Of The Seat. |
| Lumbar Support Airbag | Made Of Medical-grade TPU Material |
| Maintenance Cycle | It Is Recommended To Check The Lubrication Status Every 20,000 Kilometers. |
|---|---|
| Installation Method | The Bearing Seat Is Connected To The Release Fork Via A Return Spring. |
| Main Material | The Outer Ring Is Made Of SUJ2 High-carbon Chromium Bearing Steel |
| Transmission Adaptation | Specially For Qijiang S6-90, S6-100, QJ805, QJ1506, Etc. |
| Interface Adaptation | Precisely Fits With The Groove Of The Clutch Fork |
| Seal | Rubber Seals At Covers And Joints, IP54 And Above. |
|---|---|
| Material | High Strength Polypropylene |
| Accessory Type | Expansion Water Tank |
| Environmental Protection | Material Is Recyclable |
| Packaging | Independent Carton |
| Packaging | Carton, Wooden Box, Custom Packaging |
|---|---|
| Maintenance Frequency | Low Maintenance Requirements |
| Dust Resistance | Built-in Dust-proof Sealing Ring |
| Corrosion Resistance | Anodic Oxidation Treatment |
| Product Model | YF3501DA03A100 |