| Material Technology | The Shell Is Made Of Flame-retardant ABS Engineering Plastic. |
|---|---|
| Full Product Name | Rear Hatch Activation Switch Control Box Assembly |
| Interface Configuration | Standard 6-8 Pin Waterproof Connector |
| Control Method | Operated By A Rocker Switch Or Button |
| Electrical Parameters | Standard 24V DC Power Supply |
| Vane-type Hydraulic Pump | Efficient And Stable, With Low Noise And Long Service Life |
|---|---|
| Electric Drive | Powered By The Vehicle's High-voltage Battery |
| Motor Interface | High-voltage Waterproof Connector |
| Motor Speed | 3000-6000rpm |
| Original Factory Part Number | 2121-00041 |
| Maintenance Cycle | It Is Recommended To Check The Lubrication Status Every 20,000 Kilometers. |
|---|---|
| Installation Method | The Bearing Seat Is Connected To The Release Fork Via A Return Spring. |
| Main Material | The Outer Ring Is Made Of SUJ2 High-carbon Chromium Bearing Steel |
| Transmission Adaptation | Specially For Qijiang S6-90, S6-100, QJ805, QJ1506, Etc. |
| Interface Adaptation | Precisely Fits With The Groove Of The Clutch Fork |
| Convenience Of Modification | Comes With A Complete Set Of Accessories Including A Lock Body, Pull Rod, Sealing Ring, And Mounting Screws |
|---|---|
| Automatic Anti-lock Function | When The Door Is Closed, The Deadbolt Automatically Snaps Into The Strike Plate. |
| Impact Resistance Performance | The Compressive Strength Of The Lock Body Is ≥ 500MPa |
| Lever Linkage | Standard Configuration: 300mm Adjustable Pull Rod |
| Main Material | The Lock Body Is Formed By Zinc Alloy Die Casting. |
| Integrated Design | Pressure Regulating Valve + Safety Valve Integrated |
|---|---|
| Filtration Technology | Single Cylinder Drying Tower Structure |
| Regenerative Technology | Reverse Blowing Regeneration System |
| Oil-water Separation | Multistage Centrifugal Filtration |
| Shell Material | High Strength Aluminum Alloy |
| Wear Rate | ≤0.25mm / Ten Thousand Times |
|---|---|
| Product Model | WVA29087, VIE22.5K3501113 |
| Applicable Scenario | Knorr 22.5 Inches |
| Brake Pad Size | 247.5*109.5*30 |
| Packaging | Foam, Carton |
| Durability Test | 500,000 Loops Without Leakage |
|---|---|
| Certification Standards | ISO 9001/GB 12676 |
| Material | Cast Iron HT250 |
| Installation Method | Threaded Type |
| Sealing Material | Nitrile Rubber |
| Anti-corrosion Treatment | Anodizing + Electrophoretic Coating |
|---|---|
| Sealed Structure | Double-layer Fluororubber O-ring |
| Main Materials | Aviation-grade Aluminum Alloy |
| Connecting Thread | M14×1.5/M16×1.5/M18*1.5 |
| Certification Standards | IATF 16949/QC/T 771-2017 |
| Control Method | Three-speed Temperature Control |
|---|---|
| Material Of The Drive Disk | High-strength Aluminum Alloy |
| Compatible Vehicle Models | All Xiamen King Long Buses |
| Friction Plate Material | Ceramic Matrix Composites |
| Response Time | ≤0.5 Seconds |
| Service Life | ≥1 Million Opening And Closing Cycles |
|---|---|
| Valve Type | Dual-chamber Balanced Height Valve |
| Installation Method | Scaffold-mounted Installation |
| Valve Body Material | Aluminum Alloy ADC12 |
| Manual Adjustment Function | 3-level Height Presets |