| Material | Copper-core Motor |
|---|---|
| Structure | Protective Net Cover |
| Rotational Speed | 1200~2000r/min |
| Air Volume | 800~1500m³/h |
| Lifespan | ≥10000 Hours |
| Corrosion Resistance | Pass The Salt Spray Test With No Rusting After 48 Hours |
|---|---|
| Hardness | The Surface Hardness Of The Kingpin Is 58 - 62HRC |
| Bearing Material | High-carbon Chromium Bearing Steel |
| Main Pin Material | 40Cr Alloy Structural Steel |
| Service Life | ≥300,000 Kilometers |
| Installation Location | Lower Part Of The Inner Side Of The Safety Door |
|---|---|
| Material | High-strength Engineering Plastics |
| Compatible Vehicle Models | Exclusive For Various School Buses |
| Type | Emergency Escape Device |
| Maintenance-free | Service Life ≥ 10 Years |
| Comfort | Can Effectively Reduce Vibration And Bumpiness |
|---|---|
| Applicable Vehicle Models | Large Jinlong, Higer And Other Buses |
| Type | Air Spring Shock Absorption Airbag |
| Spatial Characteristics | Compact In Structure |
| Inflatable Medium | Compressed Air |
| Algorithm Implementation | Precise Temperature Control Within ±0.3℃ |
|---|---|
| Control | Independent Multi-temperature Zones |
| Material | Metal Anodized Panel |
| Adapt | - From 40℃ To 85℃ |
| Characters Are Wear-resistant Up To | 100,000 Times |
| Core Materials | High Carbon Chromium Bearing Steel |
|---|---|
| Sealing Characteristics | Double-sided Seal |
| Long Lifespan | ≥300,000 Km |
| Resistant To High Temperatures | -40℃~120℃ |
| Hardness | HRC58-62 |
| Durability | 2 Million Charge And Discharge Cycle Life |
|---|---|
| Salt Spray Test | No Rust After 1000 Hours |
| Noise Control | Operating Noise ≤ 65dB |
| Reliability | IP67 Waterproof Rating |
| Weight | Lightweight Design |
| The Shell Is Made Of | ADC12 Aluminum Alloy |
|---|---|
| Dynamic Response Time | ≤0.3 Seconds |
| Wheel Body | Ductile Iron |
| Gas Source Pressure | 0.6-0.8MPa |
| Salt Spray Test Reaches | 1000 Hours |
| Shared | Compressed Air Source |
|---|---|
| Sealed Components | Imported Materials |
| Emergency | Manual Operation |
| Response | Stable Assistance |
| Standard | Interface Design |
| Slot Pitch Accuracy | Tolerance Of The Center Distance Between Two Slots Is ±0.1mm |
|---|---|
| Main Models | Golden Dragon XMQ6127Y |
| Anti-fatigue | 100,000 - Cycle Loading Test |
| Operating Temperature Range | - 40℃ To 120℃ |
| Structural Design | Double Slots |