| Speed Range | 45r/min (low Speed) / 65r/min (high Speed) |
|---|---|
| Motor Material | Aluminum Alloy Housing + Nylon Gears |
| Adapt To The Windshield Wiper Arm | Single-arm / Double-arm Type |
| Certification Standards | IATF 16949/GB/T 24348 |
| Environmental Temperature Range | -40℃~+85℃ |
| Types Of Oil Seals | Double-lip Oil Seal With Spring-loaded Skeleton |
|---|---|
| Skeleton Material | Galvanized Low-carbon Steel Skeleton |
| Adapted Axle Model | Hande 425/469/500/525 Series Axles |
| Certification Standards | 0.12kg±0.01kg |
| Lip Edge Design | Parabolic Sealing Lip |
| Anti-corrosion Treatment | Anodizing + Electrophoretic Coating |
|---|---|
| Sealed Structure | Double-layer Fluororubber O-ring |
| Main Materials | Aviation-grade Aluminum Alloy |
| Connecting Thread | M14×1.5/M16×1.5/M18*1.5 |
| Certification Standards | IATF 16949/QC/T 771-2017 |
| Dust-proof Structure | Double-layer Fluororubber Sealing Cover |
|---|---|
| Fatigue Life | 2 Million Times Of Loop Loading |
| Vibration Test | 10~2000Hz Sine Vibration |
| Connection Method | Integrally Forged Ball Pin |
| Surface Treatment | Zinc-nickel Alloy Coating |
| Hydrogen Embrittlement Protection | After Pickling, Carry Out Dehydrogenation Treatment At A Constant Temperature Of 200℃ For 4 Hours. |
|---|---|
| Lubrication System | Long-acting Lithium-based Lubricating Grease |
| Installation Method | Press - Fit Quick - Release Structure |
| Maintenance Interval | 1 Million Kilometers Or 60 Months |
| Fatigue Life | 3 Million Times Of Loop Loading |
| Compatible Vehicle Models | Buses Such As Yutong, King Long, Zhongtong, And Hengtong |
|---|---|
| Material Composition | High-strength Aluminum Alloy Cylinder Block |
| Fatigue Life | 500,000 Cycles Of Loop Loading |
| Output Characteristics | Linear Output Curve |
| Surface Treatment | Hard Anodizing |
| Compatible Vehicle Models | Haige KLQ120G03D/KLQ6110K05D/6850 Series And Other Vehicle Models |
|---|---|
| Fatigue Life | 2.5 Million Cycles Of Angular Displacement |
| Lubrication System | Compound Lithium-based Grease Filling |
| Structural Design | Double Ball Seat All-metal Joint |
| Surface Treatment | Zinc-nickel Alloy Electroplating |
| Install Tools | Special Hydraulic Sleeve Press |
|---|---|
| Corrosion Resistance | Salt Spray Test ≥ 500 Hours |
| Surface Treatment | Outer Wall Phosphating |
| Oil Tank Design | 3 Spiral Oil Grooves |
| Execution Standards | QC/T 29097-2014 |
| Special Customization | Support Diameter Specifications From Φ75 To Φ105mm And Length Specifications From 110 To 150mm |
|---|---|
| Dynamic Fatigue | 100kN Alternating Load Cycles 100,000 Times |
| Rubber Body | Ethylene Propylene Diene Monomer Rubber |
| Hollow Pin Shaft | Seamless Steel Pipe Hot Forging Forming |
| Rotation Angle | ±15° Without Jamming |
| Typical Dimensions | Outer Diameter Φ88mm × Inner Diameter Φ50mm × Height 67mm |
|---|---|
| Full-wrapped Structure | The Two Ends Of The Metal Shell Are Bent Inwards By 3mm. |
| Mainstream Adaptation | DongfengDena 435/460/485 Single-stage Reducing Axle |
| Metal Framework | Q345B Low Alloy High Strength Steel |
| Wear-resistant Layer | Polyoxymethylene (POM) Ball Bowl |