| Quality Commitment | Inspection One By One, With A Pass Rate Of 100% |
|---|---|
| Accessory Type | Commercial Vehicle Air Conditioning Accessories |
| Temperature Sensing System | Charging Type Temperature Sensing Bulb |
| Packaging | Carton, Wooden Box, Custom Packaging |
| Model | Air Conditioner Expansion Valve |
| Models To Be Adapted | Shaanxi Auto Delong / Foton Auman / Yutong King Long Bus |
|---|---|
| Material Composition | High-strength Aluminum Alloy Shell |
| Tensile Force Characteristics | Rated Tension Force 800 - 1200N |
| Fatigue Life | 1 Million Times Of Loop Loading |
| Working Principle | Planar Spring Torsion Structure |
| Multi-vehicle Model Adaptation | Compatible With Buses Such As Yutong, King Long, Higer, Etc. |
|---|---|
| Installation Adaptation | The Thickness Of The Car Door Is 40 - 60mm |
| Switch Life | ≥300,000 Times |
| Main Body Material | Stainless Steel |
| Operating Temperature Range | -35℃~+70℃ |
| Installation Accuracy | The Tolerance Of The Distance Between The Lock Body Installation Holes Is ±0.5mm |
|---|---|
| Compatible With Multiple Vehicle Models | Suitable For Buses Such As Yutong / King Long |
| Main Body | Zinc Alloy Die - Cast Housing |
| Temperature Resistance | - 40℃~120℃ |
| Anti-vibration Level | 20-2000Hz |
| Low Battery Reminder | When The Voltage Is Less Than 2.6V, The Key Backlight Flashes. |
|---|---|
| Models Applicable To | Jinlong, Yutong, Zhongtong Buses |
| Antenna Type | Built-in FPC Flexible Antenna |
| Single Door Independent Control | Pneumatic Door Adaptation |
| General Interface | 5PIN Waterproof Terminal |
| Applicable To | Mainstream Bus Brands Such As Yutong, King Long, Zhongtong, Higer, And Golden Dragon |
|---|---|
| Fatigue-resistant | No Deformation After 100,000 Cycles Of Testing |
| Regulating Device | Used To Adjust The Length Of The Pull Rod |
| Pneumatic Door Pump Pull Rod | For Pneumatic Outward-swinging Doors |
| Pneumatic System | Working Pressure 0.4-0.8MPa |
| Corrosion Resistance | Salt Spray Test For 1000 Hours |
|---|---|
| Fast Charging Mode | Flow Rate ≥ 250L/min |
| Slow Charging Mode | Flow Rate ≤ 50L/min |
| Valve Body | Aluminum Alloy |
| Traffic | ≤30L/min |
| High Temperature Stability | 250 ℃ High Temperature Compression Permanent Deformation Rate ≤ 1.5% |
|---|---|
| Temperature Range | -40 ℃ To 125 ℃ Full Temperature Range Operation |
| Carrying Capacity | Rated Transmission Torque 1200N ・ M |
| Identification And Traceability | Pressure Plate Hub Laser Etching Model |
| Main Material | HT250 Gray Cast Iron Material |
| Maintenance Cycle | It Is Recommended Every 20,000 Kilometers |
|---|---|
| Surface Treatment | Carburized Layer Depth |
| Heat Treatment Process | Quenching Hardness |
| Lubrication Method | Grease Lubrication |
| Journal Size | Heteromorphism |
| Environmental Resistance Performance | 720 Hours Of Neutral Salt Spray Test With No Corrosion |
|---|---|
| Fatigue Life | After 1,000,000 Cycles Of Load Testing |
| Buffering Performance | Preset 25% Compression Amount |
| Installation Method | Fixed By The Central Bolt |
| Load Capacity | Static Limit Load ≥ 50kN |