| Vane-type Hydraulic Pump | Efficient And Stable, With Low Noise And Long Service Life |
|---|---|
| Electric Drive | Powered By The Vehicle's High-voltage Battery |
| Motor Interface | High-voltage Waterproof Connector |
| Motor Speed | 3000-6000rpm |
| Original Factory Part Number | 2121-00041 |
| Installation Location | Suitable For Side-mounted Luggage Compartment Doors, Rear-mounted Luggage Compartment Doors And Engine Compartment Doors |
|---|---|
| Humidity Adaptation | No Rust In An Environment With Humidity ≤ 95% RH |
| Impact Resistance Strength | Lock Body Compressive Strength ≥ 800MPa |
| Lock Cylinder Configuration | Using A Copper Pin Tumbler Lock Cylinder |
| Temperature Tolerance | Operating Temperature -40℃~+85℃ |
| Compatible With Multiple Vehicle Models | Applicable To Buses, Public Transportation Vehicles, Tourist Coaches, Etc. |
|---|---|
| Quick Response | Adjust The Speed At The Millisecond Level |
| High Tightness | Special Process Treatment |
| Corrosion Resistance | Special Coating Treatment |
| Material | High-elasticity Rubber |
| Maintenance Cycle | It Is Recommended To Check The Lubrication Status Every 20,000 Kilometers. |
|---|---|
| Installation Method | The Bearing Seat Is Connected To The Release Fork Via A Return Spring. |
| Main Material | The Outer Ring Is Made Of SUJ2 High-carbon Chromium Bearing Steel |
| Transmission Adaptation | Specially For Qijiang S6-90, S6-100, QJ805, QJ1506, Etc. |
| Interface Adaptation | Precisely Fits With The Groove Of The Clutch Fork |
| Pass Through | - Full Temperature Range Test From - 40℃ To 85℃ |
|---|---|
| Adopt | ADC12 Aluminum Alloy |
| Technology | Permanent Magnet Synchronous |
| The Carbon Brush Has A Long Lifespan. | 200,000 Kilometers |
| Provide | 28V 100A-240A |
| Installation Location | The Top Of The Air Shock Absorber Spring |
|---|---|
| Maintenance Convenience | The Structure Is Reasonably Designed |
| Connection Method | Standard Bolt Hole Positions |
| Material Composition | High-strength Steel |
| Durability | Strict Fatigue Test |
| Model | 3412-00153 |
|---|---|
| Adopt | 40Cr |
| Tensile Strength | ≥650MPa |
| Industry | Integral Forging Process |
| Hardened Layer | 0.8-1.2mm |
| Installation Method | Threaded Connection M22×1.5 |
|---|---|
| Switch Type | Integrated Contactless Switch |
| Control The Temperature Range | 75 - 85℃ Can Be Customized |
| Service Life | ≥10000 Times |
| Insulation Resistance | >100MΩ |
| Sealing Parts | Adopt Flame-retardant Materials |
|---|---|
| Material | A380 Aluminum Alloy |
| Key Processes | 100% Full Inspection. |
| Gas Path Opening And Closing Time | <0.2 Seconds |
| Pass Through | Salt Spray Test |
| Routine Maintenance | 60,000 - 80,000 Kilometers |
|---|---|
| High Reliability | Pass The 3C Certification |
| Model | Yuanfeng AD04-AD06 |
| Component Accuracy | Guide Sales, Piston |
| In Response To | Caliper Sticking |