| Length | L=250mm,L=275mm |
|---|---|
| Shaft Diameter | Φ35mm,Φ40mm |
| Damping Coefficient | 10~12N・s/mm |
| Base Material | 40Cr Alloy Steel |
| Critical Speed | ≥8000r/min |
| Process Optimization | Adopt Secondary Vulcanization Molding Technology |
|---|---|
| Material Composition | Using Ethylene Propylene Diene Monomer Rubber |
| Self-lubricating Design | The Inner Wall Is Sprayed With A PTFE Coating |
| Temperature Characteristics | Operating Temperature Range -40℃ To 120℃ |
| Environmental Adaptation | Passed 500-hour Ozone Aging Test |
| Core Structure | Dual-coil Electromagnetic Control + Friction Plate Clutch Mechanism |
|---|---|
| Material Composition | High-strength Cast Iron Shell + Aluminum Alloy Heat Sink Plate |
| Accessory Type | Rear-mounted Three-speed Electromagnetic Fan Clutch |
| Torque Output | Maximum Transmitted Torque ≥ 180N・m |
| Suitable Shaft Diameter | Standard 38mm/42mm Two Specifications |
| Model | HZ723 HY723 3502-00609 3502-00608 |
|---|---|
| Shell Material | High-strength Aluminum Alloy |
| Vibration Resistant | 10~500Hz, Acceleration 20g |
| Lubrication System | Lithium-based Grease |
| Worm Gear And Worm Materials | 42CrMo Alloy Steel |
| Disassemble | Simple Disassembly Structure For Convenient Regular Cleaning And Maintenance. |
|---|---|
| Protection | All-round Wrapping Effectively Blocks The Invasion Of Sediment And Stones. |
| Installation | Snap-on Design, No Tools Required, Quick Installation. |
| Quality Commitment | Inspection One By One, With A Pass Rate Of 100% |
| Model | 2931-01010 2931-01010G |
| Lubrication Design | Automatic Lubricating Mechanism |
|---|---|
| Maintenance Cost | The Pump Sleeve Can Be Replaced. |
| Technical Certification | WABCO Global Standards |
| Product Model | 1604-00868 9700516080 |
| Sealing Technology | New Type Exhaust Valve |
| Low Battery Reminder | When The Voltage Is Less Than 2.6V, The Key Backlight Flashes. |
|---|---|
| Models Applicable To | Jinlong, Yutong, Zhongtong Buses |
| Antenna Type | Built-in FPC Flexible Antenna |
| Single Door Independent Control | Pneumatic Door Adaptation |
| General Interface | 5PIN Waterproof Terminal |
| Inside | Magnetic Steel |
|---|---|
| Durability | Strict Testing |
| Threaded Interface | M18×1.5 |
| Brand | VDO |
| Output Signal | Pulse |
| Corrosion Resistance | Galvanized Or Cadmium Plated, Salt Spray 240 Hours + |
|---|---|
| Dynamic Balance Accuracy | G2.5 Level And Above To Ensure High-speed Stability |
| Assembly Gap | 0.05 - 0.15mm, Strict Control To Ensure Flexibility. |
| Lifespan | Under Normal Maintenance, Travel 200,000 Km + |
| Material | 20CrMnTi Alloy Steel, Carburized And Quenched. |
| Anti-corrosion Treatment | Anodizing + Electrophoretic Coating |
|---|---|
| Sealed Structure | Double-layer Fluororubber O-ring |
| Main Materials | Aviation-grade Aluminum Alloy |
| Connecting Thread | M14×1.5/M16×1.5/M18*1.5 |
| Certification Standards | IATF 16949/QC/T 771-2017 |