| Installation Accuracy | The Tolerance Of The Distance Between The Lock Body Installation Holes Is ±0.5mm |
|---|---|
| Compatible With Multiple Vehicle Models | Suitable For Buses Such As Yutong / King Long |
| Main Body | Zinc Alloy Die - Cast Housing |
| Temperature Resistance | - 40℃~120℃ |
| Anti-vibration Level | 20-2000Hz |
| Corrosion Resistance | Salt Spray Test For 1000 Hours |
|---|---|
| Fast Charging Mode | Flow Rate ≥ 250L/min |
| Slow Charging Mode | Flow Rate ≤ 50L/min |
| Valve Body | Aluminum Alloy |
| Traffic | ≤30L/min |
| Adaptation Specifications | Compatible With Buses Such As King Long, Yutong, And Higer |
|---|---|
| Fatigue Life | The Mechanical Lifespan Of The Key Is ≥ 100,000 Presses |
| Anti-interference Design | DSSS+FHSS Hybrid Spread Spectrum Technology |
| Wide Temperature Operation | Stable Operation From -20℃ To 60℃ |
| Operation Response | Key Trigger Response Time ≤ 50ms |
| High Temperature Stability | 250 ℃ High Temperature Compression Permanent Deformation Rate ≤ 1.5% |
|---|---|
| Temperature Range | -40 ℃ To 125 ℃ Full Temperature Range Operation |
| Carrying Capacity | Rated Transmission Torque 1200N ・ M |
| Identification And Traceability | Pressure Plate Hub Laser Etching Model |
| Main Material | HT250 Gray Cast Iron Material |
| Environmental Resistance Performance | 720 Hours Of Neutral Salt Spray Test With No Corrosion |
|---|---|
| Fatigue Life | After 1,000,000 Cycles Of Load Testing |
| Buffering Performance | Preset 25% Compression Amount |
| Installation Method | Fixed By The Central Bolt |
| Load Capacity | Static Limit Load ≥ 50kN |
| Dustproof And Waterproof | Prevent Dust, Oil Stains, And Liquids From Seeping Into The Gear Shift Mechanism |
|---|---|
| Full Product Name | Gearshift Dust Cover Three Flexible Shaft Assembly |
| Maintenance Convenience | The Dust Cover Can Be Replaced Separately. |
| Protection Level | IP54 Dustproof And Splash-proof |
| Service Life | ≥5 Years Or 1,000,000 Kilometers |
| Maintenance Cycle | It Is Recommended Every 20,000 Kilometers |
|---|---|
| Surface Treatment | Carburized Layer Depth |
| Heat Treatment Process | Quenching Hardness |
| Lubrication Method | Grease Lubrication |
| Journal Size | Heteromorphism |
| Anti-corrosion Treatment | Anodizing + Electrophoretic Coating |
|---|---|
| Sealed Structure | Double-layer Fluororubber O-ring |
| Main Materials | Aviation-grade Aluminum Alloy |
| Connecting Thread | M14×1.5/M16×1.5/M18*1.5 |
| Certification Standards | IATF 16949/QC/T 771-2017 |
| Adapt To | - Wide Temperature Range Environment From - 40℃ To 80℃ |
|---|---|
| Protection Level | IP65 Dustproof And Splash-proof |
| Brand Compatibility | Jinlong / Higer / Zhongtong |
| Safety Level | B+ Level Anti-theft Standard |
| Key Insertion And Extraction Lifespan | ≥100,000 Times |
| Easy To Maintain | The Design Life Of The Brush Assembly Is ≥ 150,000 Kilometers |
|---|---|
| Protection Level | The Entire Machine Has IP54 Dust And Water Resistance Rating |
| Material Technology | The Shell Is Made Of ADC12 Aluminum Alloy By Die Casting. |
| Speed Characteristic | Idle Condition (800±50r/min) Output ≥ 60A |
| Efficiency Performance | Efficiency ≥ 85% At 75% Load |