| Skeleton | Cathodic Electrophoretic Diamond Wire Mesh |
|---|---|
| Typical Dimensions | Outer Diameter Φ250mm × Height Φ460mm |
| Vibration Resistance Performance | 10 - 500Hz Sweep Frequency Vibration Test |
| Filter Paper | Imported Composite Fiber Filter Paper |
| Transportation Protection | Compressive Strength ≥ 500N |
| Insulation Strength | No Breakdown Between Contact And Coil At AC 1000V For 1 Minute |
|---|---|
| Manufacturing Process | The Contact Points Are Welded Using Cold Pressure Welding. |
| Temperature Range | Operates In The Full Temperature Range From -40℃ To 125℃ |
| Fatigue Life | Mechanical Durability: 500,000 Times |
| Process Precision | Contact Gap Tolerance ±0.02mm |
| Joint Material | Aviation-grade Aluminum Alloy |
|---|---|
| Salt Spray Test | 1000 Hours Without Corrosion |
| Maintenance - Free Cycle | 8 Years / 500,000 Kilometers |
| Material | High-strength Steel Core |
| Service Life | ≥500,000 Shift Cycles |
| After-sales Service | Provide 12 Months Of Warranty |
|---|---|
| Motor Type | Permanent Magnet DC Motor |
| Protection Function | Built-in Overheat Protection |
| Torque Performance | Rated Torque ≥ 80N·m |
| Wire Harness Interface | Customizable |
| Material Composition | Natural Rubber + Metal Skeleton Composite Material |
|---|---|
| Hardness Index | Shore A Hardness 70±5 Shore A |
| Durability | 100,000 - Cycle Vibration Test |
| Bearing Capacity | Static Load ≥ 500kg |
| Temperature Resistance Range | -45℃ To + 120℃ |
| System Linkage | Original Vehicle Pneumatic Door |
|---|---|
| Exhaust | Rotate The Handle By 90° |
| Surface | Electrophoretic Primer |
| Salt Spray Test | Over 1000 Hours |
| Meet; Satisfy | GB 13094-2017 |
| Service Life | ≥1 Million Opening And Closing Cycles |
|---|---|
| Valve Type | Dual-chamber Balanced Height Valve |
| Installation Method | Scaffold-mounted Installation |
| Valve Body Material | Aluminum Alloy ADC12 |
| Manual Adjustment Function | 3-level Height Presets |
| Pressure Control | The Braking Pressure Can Be Precisely Controlled Within The Range Of 0-11bar. |
|---|---|
| Interface Standard | Compliant With SAE J1939 Communication Protocol |
| Valve Body Structure | Precision-machined Aluminum Alloy Shell |
| Protection Level | IP68/IP6K9K Dual Protection |
| Durability | Passed 1,000,000 Loop Tests |
| Service Life | ≥800,000 Opening And Closing Cycles |
|---|---|
| Configuration | Front Door Opens. Rear Door Opens. |
| Anti-pinch Protection Function | Air Pressure Feedback Sensor |
| Drive Form | Single-cylinder Linkage Type |
| Speed Regulation Function | Two-way Throttle Valve |
| Special Rubber Composite Layer | Oil-resistant/Ozone-resistant/Aging-resistant Formula |
|---|---|
| Transient Temperature Rise Suppression | Operating Temperature Range: -40℃ To +120℃ |
| Multi - Directional Damping Structure | Suppress Multi - Axis Vibration Transmission |
| Memory Alloy Limit Ring | Temperature Adaptive Deformation Recovery |
| Modular Interface | Quick - Detachable Clamp Connection |