| Work In The Full Temperature Range | Stable Operation In An Environment Ranging From -40℃ To 85℃ |
|---|---|
| Pressure Drop Control | Initial Pressure Drop At Rated Air Volume ≤ 2kPa |
| Quality System | Produced By IATF 16949 Certified Factories |
| Precise Matching | Original Factory Number 1109-08269 |
| Dust Holding Capacity | Static Dust Holding Capacity ≥ 300g |
| Adopt | Dual-contact Temperature Sensing Bulb |
|---|---|
| Wear-resistant Life | ≥100,000 Times Of Adjustment Cycles |
| Adapt To The Daily Average | ≥150 Start-stop Operations |
| Operating Temperature Range | - From 40℃ To 80℃ |
| Heat Transfer Efficiency | Increase By 20% |
| Filter Material | Adopt A Double-layer Composite Filter Material Of Fiberglass + Resin-impregnated Cellulose |
|---|---|
| Environmental Adaptation | - From The Frigid Zone Of - 40℃ To The High - Temperature Area Of 55℃ |
| Environmentally Friendly Materials | Filter Materials Can Be 100% Recycled. |
| Deep Matching | Yuchai, Weichai Series |
| The Service Life Reaches | 20,000 Kilometers |
| Inside | Magnetic Steel |
|---|---|
| Durability | Strict Testing |
| Threaded Interface | M18×1.5 |
| Brand | VDO |
| Output Signal | Pulse |
| Corrosion Resistance | Galvanized Or Cadmium Plated, Salt Spray 240 Hours + |
|---|---|
| Dynamic Balance Accuracy | G2.5 Level And Above To Ensure High-speed Stability |
| Assembly Gap | 0.05 - 0.15mm, Strict Control To Ensure Flexibility. |
| Lifespan | Under Normal Maintenance, Travel 200,000 Km + |
| Material | 20CrMnTi Alloy Steel, Carburized And Quenched. |
| Anti-corrosion Treatment | Anodizing + Electrophoretic Coating |
|---|---|
| Sealed Structure | Double-layer Fluororubber O-ring |
| Main Materials | Aviation-grade Aluminum Alloy |
| Connecting Thread | M14×1.5/M16×1.5/M18*1.5 |
| Certification Standards | IATF 16949/QC/T 771-2017 |
| Disassemble | Simple Disassembly Structure For Convenient Regular Cleaning And Maintenance. |
|---|---|
| Protection | All-round Wrapping Effectively Blocks The Invasion Of Sediment And Stones. |
| Installation | Snap-on Design, No Tools Required, Quick Installation. |
| Quality Commitment | Inspection One By One, With A Pass Rate Of 100% |
| Model | 2931-01010 2931-01010G |
| Skeleton | Cathodic Electrophoretic Diamond Wire Mesh |
|---|---|
| Typical Dimensions | Outer Diameter Φ250mm × Height Φ460mm |
| Vibration Resistance Performance | 10 - 500Hz Sweep Frequency Vibration Test |
| Filter Paper | Imported Composite Fiber Filter Paper |
| Transportation Protection | Compressive Strength ≥ 500N |
| Temperature Adaptability | Wide Temperature Range (-30℃~80℃) Operation |
|---|---|
| Operation Mode | Manual Override Mechanical Transmission |
| Wear Resistance | Low-friction Coefficient Coating Process |
| Transmission | Dual-cable Synchronized Push-pull |
| Adjustment | Telescopic Lever Length Adjustment |
| Odm | Avilable |
|---|---|
| Response Characteristics | Separation Lag Time ≤ 0.2 Seconds |
| Release Time | ≤10ms |
| Port | Guangzhou |
| Installation Parameters | Four - Point Fixing |