| Pass Through | CNC 3D Scanning And Modeling |
|---|---|
| Adopt | Quick - Connect Metal Joint |
| Support | Arbitrary Bending Radius |
| Temperature Resistance Range | - 40℃ To 120℃ |
| Pressure Resistance Ability | ≤0.6MPa |
| Function | Thermal Dissipation Performance Optimization |
|---|---|
| Quality Guarantee | 3 Years And 500,000 Kilometers |
| Maintain | Maintenance-free Design |
| Model | 3103-00933/10045884 |
| Adapt | Kangmai Bridge |
| Apply To | - From The Frigid Zone Of - 40℃ To The High - Temperature Area Of 55℃ |
|---|---|
| Environmental Protection Design | The Materials Can Be 100% Recycled. |
| Lightweight | Aluminum Alloy Shell |
| Support | 1.2 - 1.5L Fuel Filling |
| Tensile Strength | ≥260MPa |
| Temperature Adaptation | -40℃ Low-temperature Startup Without Jamming |
|---|---|
| Salt Spray Test | 96 Hours Without Red Rust |
| Dust Cover Fixing | 65Mn Spring Snap Ring |
| Extended Maintenance Cycle Without Lubrication | 100,000 Kilometers |
| Dimensional Accuracy | Ra≤0.8μm |
| Fatigue Life | After 100,000 Compression Cycles, The Rebound Attenuation Is ≤ 3% |
|---|---|
| Medium Resistance | Resistant To Immersion In Engine Oil And Coolant For 168 Hours |
| Temperature Range | Operating In The Full Temperature Range From -40℃ To 125℃ |
| Friction Material | German Raybestos Composite Fiber Material |
| Shock-absorbing Spring | Oil-quenched And Tempered Spring Steel Wire |
| Range | LED Model ≥200 Meters / Xenon Model ≥250 Meters |
|---|---|
| Quality Commitment | Inspection One By One, With A Pass Rate Of 100% |
| Packaging | Carton, Wooden Box, Custom Packaging |
| Shell | Aviation Aluminum Heat Dissipation |
| Illuminance Value | 20 Meters Away, ≥300 Lux. |
| Joint Material | Aviation-grade Aluminum Alloy |
|---|---|
| Salt Spray Test | 1000 Hours Without Corrosion |
| Maintenance - Free Cycle | 8 Years / 500,000 Kilometers |
| Material | High-strength Steel Core |
| Service Life | ≥500,000 Shift Cycles |
| Quality Commitment | Inspection One By One, With A Pass Rate Of 100% (supporting Attached Inspection Reports) |
|---|---|
| Packaging | Carton, Wooden Box, Custom Packaging |
| Low-temperature Starting Performance | -20℃ Cold Friction Coefficient ≥ 0.3 |
| Wear Rate | ≤0.3mm / Ten Thousand Times |
| Material Type | Ceramic Composite Sheet |
| Long Life And Durability | Adopting High-quality Lamp Beads, The Service Life Can Reach More Than 50,000 Hours. |
|---|---|
| High Brightness Lighting | Ensure Sufficient Lighting In The Carriage To Meet The Needs Of Reading And Passage. |
| Multicolor Ambient Light | Support Single-color Or Gradient Mode To Create A Comfortable Atmosphere. |
| Soft And Not Dazzling | Adopt Warm Light Or Soft Light Design To Protect Passengers' Eyesight. |
| Low Power Consumption Design | Reduce Vehicle Energy Consumption And Improve Cruising Range. |
| Load Type | Compatible With DC Motor / Permanent Magnet Motor |
|---|---|
| Packaging Process | Moisture-proof Silicone Potting |
| Rain Sensor Adaptation | Support External Sensors |
| Applicable Scenario | Bus Electrical Appliance |
| Shell Material | PA66 Fireproof Plastic |