| Anti-corrosion Treatment | Anodizing + Electrophoretic Coating |
|---|---|
| Sealed Structure | Double-layer Fluororubber O-ring |
| Main Materials | Aviation-grade Aluminum Alloy |
| Connecting Thread | M14×1.5/M16×1.5/M18*1.5 |
| Certification Standards | IATF 16949/QC/T 771-2017 |
| Cycle Life | 50,000 - 100,000 Repetitions Of Opening And Closing |
|---|---|
| Temperature Range | - From -40℃ To 85℃ |
| Itinerary | 10mm - 20mm |
| Good Compatibility | Various Buses |
| Shell | Metal/Plastic |
| Surface Hardness | HRC58-62, Wear Resistant. |
|---|---|
| Flow Characteristics | Nominal Diameter Φ6mm |
| Service Life | ≥5 Years / 150,000 Cycles |
| Accessory Type | Pneumatic Accessories |
| Material Composition | 42CrMo Alloy Steel |
| Pass Through | - Full Temperature Range Test From - 40℃ To 85℃ |
|---|---|
| Adopt | ADC12 Aluminum Alloy |
| Technology | Permanent Magnet Synchronous |
| The Carbon Brush Has A Long Lifespan. | 200,000 Kilometers |
| Provide | 28V 100A-240A |
| Shared | Compressed Air Source |
|---|---|
| Sealed Components | Imported Materials |
| Emergency | Manual Operation |
| Response | Stable Assistance |
| Standard | Interface Design |
| Model | 3412-00153 |
|---|---|
| Adopt | 40Cr |
| Tensile Strength | ≥650MPa |
| Industry | Integral Forging Process |
| Hardened Layer | 0.8-1.2mm |
| Easy To Maintain | The Design Life Of The Brush Assembly Is ≥ 150,000 Kilometers |
|---|---|
| Protection Level | The Entire Machine Has IP54 Dust And Water Resistance Rating |
| Material Technology | The Shell Is Made Of ADC12 Aluminum Alloy By Die Casting. |
| Speed Characteristic | Idle Condition (800±50r/min) Output ≥ 60A |
| Efficiency Performance | Efficiency ≥ 85% At 75% Load |
| Temperature Range | Operates In The Full Temperature Range From -40℃ To 125℃ |
|---|---|
| Life Expectancy Indicator | The Fatigue Life Of The Whole Machine Is ≥ 100,000 Cycles |
| Core Structure | Brushless Permanent Magnet Design |
| Surface Treatment | Anodizing + Electrophoretic Coating |
| Adjustment Accuracy | Voltage Regulation Accuracy ±0.3V |
| Threaded Interface | G1/4"、M10×1 |
|---|---|
| Operating Temperature | 40℃ - +125℃ |
| Detection Range | 0 - 16bar |
| Operating Voltage | DC 24V |
| Measurement Accuracy | ±0.2bar |
| Installation Location | The Top Of The Air Shock Absorber Spring |
|---|---|
| Maintenance Convenience | The Structure Is Reasonably Designed |
| Connection Method | Standard Bolt Hole Positions |
| Material Composition | High-strength Steel |
| Durability | Strict Fatigue Test |