| Installation Method | Fixed To The Front Face Of The Vehicle Body With 4 High-strength Bolts |
|---|---|
| Sealing Process | Adopts A Double O-ring Sealing Design |
| Protection Level | IP67, Dustproof And Waterproof |
| Certification Standards | Obtain EU ECE R112 |
| Operating Temperature | -40℃~+85℃ |
| Fatigue Life | Tested Under Simulated Working Conditions For More Than 1 Million Times |
|---|---|
| Precision Manufacturing | The Precision Control Of Knurling And Threading Is Within ±0.05mm |
| Surface Treatment | Anti-corrosion Phosphating And Oil Immersion |
| Material | High-quality Alloy Structural Steel |
| ConMet Original Factory Warranty | 3 Years Or 500,000 Kilometers |
| Overload Protection | Automatically Relieve Pressure When The Air Pressure Exceeds 1MPa |
|---|---|
| Main Airbag Module | Provide Seat Suspension And Shock Absorption Function |
| Structural Strength | The Overall Design Load-bearing Capacity Is ≥ 200kg |
| Manual Adjustment | Control Knobs Are Set On The Side Of The Seat. |
| Lumbar Support Airbag | Made Of Medical-grade TPU Material |
| Applicable To | Mainstream Bus Brands Such As Yutong, King Long, Zhongtong, Higer, And Golden Dragon |
|---|---|
| Fatigue-resistant | No Deformation After 100,000 Cycles Of Testing |
| Regulating Device | Used To Adjust The Length Of The Pull Rod |
| Pneumatic Door Pump Pull Rod | For Pneumatic Outward-swinging Doors |
| Pneumatic System | Working Pressure 0.4-0.8MPa |
| Cross-model Compatibility | Can Directly Replace FAG Bearings Of The Same Specification |
|---|---|
| Failure Protection | The Impact Strength Of The Steel Cage Is ≥50J/cm² |
| Precise Adaptation | Designed Specifically For Bus Drive Motors |
| Main Material | SUJ2 High-carbon Chromium Bearing Steel |
| Model Parsing | 6216 Series Deep Groove Ball Bearings |
| Temperature Range | -40℃~125℃ Full Temperature Range Operation |
|---|---|
| Valve Body Material | Aluminum Alloy Die Casting Forming |
| Installation Interface | M16×1.5 Threaded Air Inlet |
| Voltage Specification | 24V DC Power Supply |
| Sealing Design | Fluororubber O-rings |
| Automatic Activation | The Anti-theft Mode Will Start Automatically 30 Seconds After The Key Is Pulled Out. |
|---|---|
| Vehicle Model Coverage | Precisely Compatible With Higer KLQ6129, KLQ6850, And KLQ6115 Series Buses |
| Rated Voltage | Compatible With 24V Vehicle-mounted DC System |
| Gear Configuration | Four-speed Mechanical Positioning |
| Lock Body Material | PA66 Reinforced Nylon Shell |
| Intermittent Frequency Adjustable | The Intermittent Wiper Mode Supports Stepless Adjustment From 3 To 15 Times Per Minute. |
|---|---|
| Temperature Range Adaptation | Stable Operation Over The Entire Temperature Range From -40℃ To 85℃ |
| Service Life | The Overall Mechanical Service Life Is ≥ 100,000 Operating Cycles |
| Insulation Protection | The Insulation Resistance Of The Ontology Is ≥ 100MΩ |
| Vehicle Model Coverage | Designed Specifically For The Higer Series |
| Reset Temperature | Reset Temperature Difference: 15℃, Automatic Reset At 70±5℃ |
|---|---|
| Temperature Range | Operates In The Full Temperature Range From -40℃ To 125℃ |
| Accuracy Class | Full Temperature Range Measurement Accuracy ±3℃ |
| Rated Voltage | Compatible With 24V DC Vehicle-mounted Systems |
| Vibration Resistance Performance | Passed The 5-2000Hz Random Vibration Test |
| Temperature Range | Stable Operation Over The Full Temperature Range From -40℃ To 125℃ |
|---|---|
| Rated Voltage | Compatible With 24V DC Vehicle-mounted Systems |
| Response Speed | The Response Time Of The On-off Action Is ≤ 10ms |
| Vibration Resistance Performance | Passed The 5-2000Hz Random Vibration Test |
| Salt Spray Protection | Neutral Salt Spray Test: No Rust For 96 Hours |