| Intelligent Recognition | Compatible With Halogen/LED Turn Signal Lights |
|---|---|
| Emergency Flash | Double Flash Mode Is Triggered Preferentially. |
| Packaging | Carton, Wooden Box, Custom Packaging |
| Model | Compound Electronic Flash Relay |
| Electromagnetic Compatibility | Meet CISPR 25 Class 3. |
| Packaging | Carton, Wooden Box, Custom Packaging |
|---|---|
| Applicable Scenario | Warm Water Pump - Variable Diameter |
| Enhanced Layer | High-strength Fiber Woven Mesh |
| Accessory Type | Accessories For Liquid Heaters |
| Antistatic Design | Surface Resistance ≤10^9Ω |
| Service Life | 3000-5000 Hours (depending On Working Conditions) |
|---|---|
| Packaging | Carton, Wooden Box, Custom Packaging,foam |
| Ambient Temperature | (-40 ℃~ 85 ℃) Wide Temperature Range |
| Regeneration Method | Automatic Timing/pressure Triggering |
| Material | Aluminum Alloy Valve Body |
| Packaging | Carton, Wooden Box, Custom Packaging |
|---|---|
| Material | NBR (acrylonitrile-butadiene Rubber) |
| Model | Guide Arm Bushing/rubber Bearing |
| Replacement Period | 80,000 - 100,000 Kilometers |
| Skeletal Material | Q235 Galvanized Steel |
| Pressure Control | The Braking Pressure Can Be Precisely Controlled Within The Range Of 0-11bar. |
|---|---|
| Interface Standard | Compliant With SAE J1939 Communication Protocol |
| Valve Body Structure | Precision-machined Aluminum Alloy Shell |
| Protection Level | IP68/IP6K9K Dual Protection |
| Durability | Passed 1,000,000 Loop Tests |
| Scope Of Adaptation | Compatible With 350mm~400mm Radiators |
|---|---|
| Bearing System | Self-lubricating Sealed Bearing |
| Durability | Passed 1,000,000 Loop Tests |
| Motor Characteristics | Carbon Brush DC Motor |
| Core Model | VA33-BP93/VLL-65A |
| Installation Location | Suitable For Side-mounted Luggage Compartment Doors, Rear-mounted Luggage Compartment Doors And Engine Compartment Doors |
|---|---|
| Humidity Adaptation | No Rust In An Environment With Humidity ≤ 95% RH |
| Impact Resistance Strength | Lock Body Compressive Strength ≥ 800MPa |
| Lock Cylinder Configuration | Using A Copper Pin Tumbler Lock Cylinder |
| Temperature Tolerance | Operating Temperature -40℃~+85℃ |
| Convenience Of Modification | Comes With A Complete Set Of Accessories Including A Lock Body, Pull Rod, Sealing Ring, And Mounting Screws |
|---|---|
| Automatic Anti-lock Function | When The Door Is Closed, The Deadbolt Automatically Snaps Into The Strike Plate. |
| Impact Resistance Performance | The Compressive Strength Of The Lock Body Is ≥ 500MPa |
| Lever Linkage | Standard Configuration: 300mm Adjustable Pull Rod |
| Main Material | The Lock Body Is Formed By Zinc Alloy Die Casting. |
| Sealed System | The Piston Adopts Imported Polyurethane (PU) Double-lip Seal + Dust-proof Combination |
|---|---|
| System Compatibility | Suitable For Hydraulic Control And Pneumatic Power Assist Systems |
| Cylinder Block Material | Adopts ADC12 Die-cast Aluminum Alloy For Integral Molding |
| Core Structure | Dual-chamber Hydraulic Control Pneumatic Booster |
| Convenient Exhaust | Equipped With An Independent Exhaust Valve |
| Response Speed | The Response Time From Pressing The Pedal To The Establishment Of Pressure Is ≤ 0.2s |
|---|---|
| Vehicle Model Adaptation | Specifically For Ankai HFF6120, HFF6850, HFF6900 Series Buses |
| Piston Process | Hard Chromium Plating On The Surface |
| Oil Temperature Adaptation | Operating Temperature -40℃ To 120℃ |
| Cylinder Block Material | Using ADC12 Die-cast Aluminum Alloy |