| Special Customization | Support Diameter Specifications From Φ75 To Φ105mm And Length Specifications From 110 To 150mm |
|---|---|
| Dynamic Fatigue | 100kN Alternating Load Cycles 100,000 Times |
| Rubber Body | Ethylene Propylene Diene Monomer Rubber |
| Hollow Pin Shaft | Seamless Steel Pipe Hot Forging Forming |
| Rotation Angle | ±15° Without Jamming |
| Surface Roughness | The Inner Wall Has A Surface Roughness Ra≤0.8μm, And The Outer Wall Has A Surface Roughness Ra≤1.6μm. |
|---|---|
| Inner Diameter | φ35mm φ40mm φ45mm φ50mm Can Be Customized |
| Install Tools | Special Hydraulic Sleeve Pressing Machine |
| Mainstream Adaptation | Yutong ZK6120H/6115BEV/6850 Series |
| Damping Coefficient | 10~15N・s/mm |
| Length | L=250mm,L=275mm |
|---|---|
| Shaft Diameter | Φ35mm,Φ40mm |
| Damping Coefficient | 10~12N・s/mm |
| Base Material | 40Cr Alloy Steel |
| Critical Speed | ≥8000r/min |
| Color Coding | The Rod Part Is Painted With Yellow Identification Paint |
|---|---|
| Detection Cycle | Disassemble And Inspect Every 15,000 Kilometers |
| Spherical Gap | Axis Right - Angled Direction 0.025~0.065mm |
| Execution Standards | QC/T 328-1999, IATF 16949:2016 |
| Nitriding Treatment | Nitriding Layer Depth 0.3 - 0.5mm |
| Anti-corrosion Treatment | Anodizing + Electrophoretic Coating |
|---|---|
| Sealed Structure | Double-layer Fluororubber O-ring |
| Main Materials | Aviation-grade Aluminum Alloy |
| Connecting Thread | M14×1.5/M16×1.5/M18*1.5 |
| Certification Standards | IATF 16949/QC/T 771-2017 |
| Types Of Oil Seals | Double-lip Oil Seal With Spring-loaded Skeleton |
|---|---|
| Skeleton Material | Galvanized Low-carbon Steel Skeleton |
| Adapted Axle Model | Hande 425/469/500/525 Series Axles |
| Certification Standards | 0.12kg±0.01kg |
| Lip Edge Design | Parabolic Sealing Lip |
| Spring Material | 60Si2MnA Alloy Steel |
|---|---|
| Diaphragm Fatigue Life | 500,000 Loops Without Damage |
| Diaphragm Material | Nitrile Rubber Composite Fabric |
| Certification Standards | ISO 9001/GB 12676 |
| Environmental Temperature Range | -40℃~+85℃ |
| Packaging | Independent Carton,Wooden Box, Stretch Film, Foam |
|---|---|
| Pot Body Material | High-strength Engineering Plastic PA66+GF30 |
| Fire Resistance Level | UL94-V0 Grade Flame Retardant Material |
| Compatible Brake Fluid Type | DOT3/DOT4/DOT5.1 Fully Compatible |
| Outlet Specification | M10/M12 Customizable |
| General Interface | Adapt To Mainstream Wiper Arms. |
|---|---|
| Motor Type | DC Permanent Magnet Motor |
| Silent Operation | Noise Reduction Gear Design |
| Product Model | ZD1531A 50W |
| International Certification | CE/EAC/GOST |
| Structure | Double Gear Reduction System |
|---|---|
| Durability Upgrade | 100,000 Times Loop Test |
| Overload Protection | Automatic Reset System |
| Surface Treatment | Nano Ceramic Coating |
| Customized Service | Laser Engraving |