| Service Life | Bench Test Simulation Service Life ≥ 300,000 Kilometers |
|---|---|
| Identification And Traceability | Laser Etching Of Model Numbers On Rubber Surfaces |
| Fail-safe | Composite Loading Fatigue Test ≥ 400,000 Times |
| Vulcanization Process | 150℃×30min High-temperature Vulcanization |
| Core Material | Natural Rubber-based Composite Materials |
| Surface Protection | Electrophoretic Primer + Polyester Topcoat Double-layer Coating |
|---|---|
| Temperature Range | Operates In The Full Temperature Range From -40℃ To 85℃ |
| Bracket Design | Matching Q235 Steel Plate Stamping Bracket |
| Core Parameters | Capacity 5L, Outer Diameter Φ205mm |
| Volume Accuracy | Actual Volume Deviation ≤ ±3% |
| Quick-release Structure | The Filter Element Adopts A Clip-on Installation, And The Replacement Time Is ≤ 5 Minutes |
|---|---|
| Long-lasting And Durable | The Overall Simulated Service Life Of The Set Of Racks Is ≥ 30,000 Kilometers |
| Precise Adaptation | Designed Specifically For Yutong E12, CL6, And T7 New Energy Buses |
| Packaging Protection | Vacuum-sealed Packaging + Moisture-proof Buffer Box |
| Original Factory Traceability | Each Set Comes With A Unique QR Code |
| Sealed System | The Piston Adopts Imported Polyurethane (PU) Double-lip Seal + Dust-proof Combination |
|---|---|
| System Compatibility | Suitable For Hydraulic Control And Pneumatic Power Assist Systems |
| Cylinder Block Material | Adopts ADC12 Die-cast Aluminum Alloy For Integral Molding |
| Core Structure | Dual-chamber Hydraulic Control Pneumatic Booster |
| Convenient Exhaust | Equipped With An Independent Exhaust Valve |
| Temperature Adaptation | Operating In The Full Temperature Range From -55℃ To 105℃ |
|---|---|
| Environmental Tolerance | Neutral Salt Spray Test: No Red Rust For 1000 Hours |
| Vibration Test | Pass The 5-2000Hz Random Vibration Test |
| Pressure Parameters | Rated Working Pressure 0.3-1.0MPa |
| Durability Performance | Complete 3000 Buffer Stroke Tests |
| Operating Temperature Range | Stable Operation In A Wide Temperature Range Of -40℃ To +125℃ |
|---|---|
| Accessory Type | Piezoresistive Air Pressure Sensor For Commercial Vehicles |
| Operating Voltage Specification | DC 24V, Exclusively For Commercial Vehicles |
| Measurement Accuracy Class | High-precision Measurement Of ±0.5% FS |
| General Adaptation Attributes | Standardized Universal Design |
| The Tank Body Adopts | Aluminum Alloy |
|---|---|
| Dynamic Fatigue Life | ≥10000 Hours |
| Work Pressure Range | 0.6-1.0MPa |
| Interceptable | ≥0.075mm |
| Tensile Strength | ≥260MPa |
| Environmental Adaptation | Operating Temperature -40℃ To +125℃ |
|---|---|
| Lightweight Design | Aluminum Alloy Shell Accounts For 70% |
| Efficiency Characteristics | Power Generation Efficiency ≥ 88% |
| Electromagnetic Compatibility | Radiated Disturbance ≤ 30dBμV/m |
| Starting Performance | -30℃ Cold Cranking Current ≤ 180A |
| The Light Intensity Meets The Standard. | The Luminous Intensity Of The Reference Axis Is ≥ 2cd |
|---|---|
| Luminous Efficiency | Photoelectric Conversion Efficiency ≥ 85lm/W |
| Light Source Type | Using 5730 Packaged Red LED Lamp Beads |
| Response Speed | LED Lighting Response Time ≤ 10ms |
| Light-transmitting Cover Design | High Light Transmittance PC Mask |
| Motor Configuration | 24V Permanent Magnet Synchronous Motor |
|---|---|
| Air Volume And Air Pressure | Rated Air Volume 2500m³/h |
| Noise Control | No-load Noise ≤ 68dB (A) |
| Protection Level | IP55 Dustproof And Waterproof |
| Impeller Material | High-strength Aluminum Alloy Die-cast Impeller |