| Packaging | Carton, Wooden Box, Custom Packaging |
|---|---|
| Accessory Type | Brake Accessories |
| Model | YF3501AD04-012 |
| Size | Standard Size |
| Quality | High Quality |
| Size | Inner Hole Diameter 24 Thickness 26 Upper Round Diameter 36 Lower Round Diameter 50 |
|---|---|
| Packaging | Carton, Wooden Box, Custom Packaging |
| Custom | Size Can Be Customized Upon Request |
| Advantage | High Elasticity, High Wear Resistance |
| Accessory Type | Stabilizer Bar Accessories |
| Wear Rate | ≤0.25mm / Ten Thousand Times |
|---|---|
| Product Model | WVA29087, VIE22.5K3501113 |
| Applicable Scenario | Knorr 22.5 Inches |
| Brake Pad Size | 247.5*109.5*30 |
| Packaging | Foam, Carton |
| Material | Semi-metal Ceramic Composite |
|---|---|
| Product Model | WVA29126/VIE19.5W-3501190 |
| Certification Standards | ISO 26262/TS16949 |
| Service Life | ≥80,000 Kilometers |
| Size | 210.5*92.3*30 |
| Applicable Vehicle Models | Yutong / King Long And Other Buses |
|---|---|
| Service Life | ≥100,000 Kilometers |
| Size | 249.5*116.6*28.9 |
| Product Model | 3501DA05-040 |
| Minimum Braking Torque | 840N・m |
| Precise Adaptation | Original Factory Number 1601-00632 |
|---|---|
| Fatigue Life | After 100,000 Braking Cycles |
| Thermal Fatigue Test | After 1000 Cycles Of Testing At 100℃-120℃ |
| Medium Resistance | Resistant To DOT4 Brake Fluid Immersion For 168 Hours |
| Dynamic Response | 90% Of The Standard Pressure Is Established Within 0.3 Seconds |
| Cylinder Bore Parameter | Matching Brake Cylinder Bore Diameter φ40mm |
|---|---|
| Datong Compatible Models | Compatible With Maxus V80 Bus Version |
| Braking Torque | Rated Braking Torque ≥ 3200 N・m |
| Sealing Level | IP54 Dustproof And Waterproof |
| Applicable Bridge Types | Datong Bus Rear Drive Axle |
| Protection Level | IP65 Level Dustproof And Water Spray Proof |
|---|---|
| Typical Working Conditions | City Buses Start And Stop Frequently. |
| Load Capacity | Rated Thrust ≥ 1200N |
| Installation Method | Flange Installation |
| Lifespan | ≥20000 Hours |
| Material Composition | High-strength Aluminum Alloy Die-cast Valve Body |
|---|---|
| Core Structure | Diaphragm-type Differential Control Structure |
| System Adaptation | Compatible With Knorr ABS/ASR/EBS Systems |
| Flow Characteristics | Maximum Exhaust Flow Rate ≥ 1500L/min |
| Operating Temperature | -40℃~+85℃ |
| Applicable Vehicle Models | Designed Specifically For Xiamen Golden Dragon Coaster XML6601/6700 Series (10-19 Seat Medium-sized Buses) |
|---|---|
| Coefficient Of Friction | At Room Temperature (25℃), μ ≥ 0.38; At High Temperature (250℃), μ ≥ 0.35 |
| Heat Distortion Rate | At A High Temperature Of 300℃, The Plane Deformation Is ≤ 0.2mm |
| Friction Material | Using Asbestos-free Composite Fiber Reinforced Materials |
| Wear Resistance | Wear Rate ≤ 0.05mg/cm²・h |