| Temperature Range | -40℃~125℃ Full Temperature Range Operation |
|---|---|
| Valve Body Material | Aluminum Alloy Die Casting Forming |
| Installation Interface | M16×1.5 Threaded Air Inlet |
| Voltage Specification | 24V DC Power Supply |
| Sealing Design | Fluororubber O-rings |
| Compatible Vehicle Models | Compatible With King Long XMQ6129, Higer KLQ6122, Foton AUV BJ6129, Etc. At The Same Time |
|---|---|
| Core Structure | Diaphragm-type Pressure Control Structure With Four Built-in Independent One-way Valves |
| Interface Specification | Air Inlet M22×1.5, All Four Air Outlets Are M16×1.5 |
| Protection Level | IP65 Dust, Oil And Water Resistance |
| Accessory Type | Four-circuit Protection Valve |
| Life Expectancy Indicator | The Effective Service Life Of The Desiccant Is ≥ 80,000 Kilometers |
|---|---|
| Install Protection | The Recommended Intake Air Temperature Is ≤ 65℃ |
| System Compatibility | Match The Output Of The Electric Air Compressor |
| Handle Traffic | Rated Air Intake Rate 340L/min±10L/min |
| Desiccant Configuration | Composite Molecular Sieve Desiccant |
| Material Composition | High-strength Aluminum Alloy Die-cast Valve Body |
|---|---|
| Core Structure | Diaphragm-type Differential Control Structure |
| System Adaptation | Compatible With Knorr ABS/ASR/EBS Systems |
| Flow Characteristics | Maximum Exhaust Flow Rate ≥ 1500L/min |
| Operating Temperature | -40℃~+85℃ |
| Flow Characteristics | Rated Flow 1200L/min |
|---|---|
| Filtration Accuracy | Adopt A Three-layer Composite Filtration Structure |
| Adapted Models | Specifically For Yutong New Energy Buses |
| Operating Temperature Range | -40℃ To 85℃ Wide Temperature Range |
| Protection Level | Whole Machine IP67 Protection |
| Size Specifications | Nominal Diameter φ23mm, Effective Thread Length 94mm, Total Length 104mm |
|---|---|
| Temperature Adaptation | Works In The Full Temperature Range From -50℃ To +150℃ |
| Vibration Test | Pass The 5-2000Hz Random Vibration Test |
| Material Composition | Adopt 42CrMo High-strength Alloy Steel |
| Torque Requirements | Installation Torque Range 200-250N・m |
| Temperature Adaptation | Operating In The Full Temperature Range From -55℃ To 105℃ |
|---|---|
| Environmental Tolerance | Neutral Salt Spray Test: No Red Rust For 1000 Hours |
| Vibration Test | Pass The 5-2000Hz Random Vibration Test |
| Pressure Parameters | Rated Working Pressure 0.3-1.0MPa |
| Durability Performance | Complete 3000 Buffer Stroke Tests |
| Material Composition | Aluminum Alloy Die-cast Valve Body + Stainless Steel Valve Core + Nitrile Rubber Seal |
|---|---|
| Accessory Type | 3/2 General Formula Solenoid Directional Valve |
| Interface Specification | M12×1.5 Standard Threaded Interface |
| Installation Specifications | Fixed With Double-hole Bolts |
| Original Factory Code | 4721706060 |
| Lifespan | ≥50000 Hours |
|---|---|
| Authentication Attribute | GB 5920-2024 |
| Temperature Range | -40℃~+85℃ |
| Protection Class | IP67 Rating |
| Vehicle Model | NEOPLAN |
| The Tank Body Adopts | Aluminum Alloy |
|---|---|
| Dynamic Fatigue Life | ≥10000 Hours |
| Work Pressure Range | 0.6-1.0MPa |
| Interceptable | ≥0.075mm |
| Tensile Strength | ≥260MPa |