| Flow Characteristics | Rated Flow 1200L/min |
|---|---|
| Filtration Accuracy | Adopt A Three-layer Composite Filtration Structure |
| Adapted Models | Specifically For Yutong New Energy Buses |
| Operating Temperature Range | -40℃ To 85℃ Wide Temperature Range |
| Protection Level | Whole Machine IP67 Protection |
| Precise Adaptation | Original Factory Number 1601-00632 |
|---|---|
| Fatigue Life | After 100,000 Braking Cycles |
| Thermal Fatigue Test | After 1000 Cycles Of Testing At 100℃-120℃ |
| Medium Resistance | Resistant To DOT4 Brake Fluid Immersion For 168 Hours |
| Dynamic Response | 90% Of The Standard Pressure Is Established Within 0.3 Seconds |
| Surface Protection | Electrophoretic Primer + Polyester Topcoat Double-layer Coating |
|---|---|
| Temperature Range | Operates In The Full Temperature Range From -40℃ To 85℃ |
| Bracket Design | Matching Q235 Steel Plate Stamping Bracket |
| Core Parameters | Capacity 5L, Outer Diameter Φ205mm |
| Volume Accuracy | Actual Volume Deviation ≤ ±3% |
| Quick-release Structure | The Filter Element Adopts A Clip-on Installation, And The Replacement Time Is ≤ 5 Minutes |
|---|---|
| Long-lasting And Durable | The Overall Simulated Service Life Of The Set Of Racks Is ≥ 30,000 Kilometers |
| Precise Adaptation | Designed Specifically For Yutong E12, CL6, And T7 New Energy Buses |
| Packaging Protection | Vacuum-sealed Packaging + Moisture-proof Buffer Box |
| Original Factory Traceability | Each Set Comes With A Unique QR Code |
| Accessory Type | Hydraulic Clutch Master Cylinder With Central Valve Structure |
|---|---|
| Core Structure | Central Valve + Built-in Set Screw + Guide Sleeve Piston |
| Material Composition | High-strength Cast Aluminum Cylinder Block |
| Implementation Standard | Compliant With QC/T593-2011 |
| Interface Specification | Oil Outlet M14×1.5 Thread |
| Accessory Type | Bidirectional Acting Hydraulic Steering Damper |
|---|---|
| Condition Adaptation | -40℃~+80℃ Wide Temperature Operation |
| Compatible Scenarios | Suitable For 12-14 Meter Three-axle Buses |
| Stability Performance | Suppressing Steering Wheel Shimmy |
| Cylinder Bore Specification | φ45mm High-pressure Oil Cylinder |
| Shore Hardness | Usually Between 40 - 80 |
|---|---|
| Rubber Type | Natural Rubber |
| Intensity | Relatively High |
| Type | Buffer Bracket |
| Lifespan | 2 Years + |
| Fatigue Life | After 100,000 Compression Cycles, The Rebound Attenuation Is ≤ 3% |
|---|---|
| Medium Resistance | Resistant To Immersion In Engine Oil And Coolant For 168 Hours |
| Temperature Range | Operating In The Full Temperature Range From -40℃ To 125℃ |
| Friction Material | German Raybestos Composite Fiber Material |
| Shock-absorbing Spring | Oil-quenched And Tempered Spring Steel Wire |
| Quality Commitment | Inspection One By One, With A Pass Rate Of 100% (supporting Attached Inspection Reports) |
|---|---|
| Packaging | Carton, Wooden Box, Custom Packaging |
| Model | HS-030-702,8101-06172 |
| Accessory Type | New Energy Vehicle |
| International Certification | CE/ISO 9001/DOT |
| Temperature Control | Two-zone Independent Adjustment |
|---|---|
| Energy Saving | Standby Power Consumption ≤ 1W |
| Accessory Type | Air Conditioning Control Panel |
| Product Model | KFD28K-074E1 8112-01066 |
| Pattern | Fifth Gear Wind Outlet Switch |