Corrosion Resistance | Salt Spray Test For 1000 Hours |
---|---|
Fast Charging Mode | Flow Rate ≥ 250L/min |
Slow Charging Mode | Flow Rate ≤ 50L/min |
Valve Body | Aluminum Alloy |
Traffic | ≤30L/min |
Maintenance Cycle | It Is Recommended Every 20,000 Kilometers |
---|---|
Surface Treatment | Carburized Layer Depth |
Heat Treatment Process | Quenching Hardness |
Lubrication Method | Grease Lubrication |
Journal Size | Heteromorphism |
Anti-corrosion Treatment | Anodizing + Electrophoretic Coating |
---|---|
Sealed Structure | Double-layer Fluororubber O-ring |
Main Materials | Aviation-grade Aluminum Alloy |
Connecting Thread | M14×1.5/M16×1.5/M18*1.5 |
Certification Standards | IATF 16949/QC/T 771-2017 |
The Shell Is Made Of | ADC12 Aluminum Alloy |
---|---|
Dynamic Response Time | ≤0.3 Seconds |
Wheel Body | Ductile Iron |
Gas Source Pressure | 0.6-0.8MPa |
Salt Spray Test Reaches | 1000 Hours |
Spring Material | 60Si2MnA Alloy Steel |
---|---|
Diaphragm Fatigue Life | 500,000 Loops Without Damage |
Diaphragm Material | Nitrile Rubber Composite Fabric |
Certification Standards | ISO 9001/GB 12676 |
Environmental Temperature Range | -40℃~+85℃ |
Core Functions | Brake Clearance Compensation |
---|---|
Advantages | Reduce Manual Maintenance |
Compressed Air Consumption | Save Approximately 25% |
Adopt | Riveting Process |
Materials | High-strength Steel |
Pass Through | CNC 3D Scanning And Modeling |
---|---|
Adopt | Quick - Connect Metal Joint |
Support | Arbitrary Bending Radius |
Temperature Resistance Range | - 40℃ To 120℃ |
Pressure Resistance Ability | ≤0.6MPa |
Lubrication System | Long - Acting Lithium - Based Lubricating Grease |
---|---|
Working Principle | Double Universal Joint Transmission |
Sealed Structure | Double Lip Fluororubber Oil Seal |
Connection Method | Integrally Forged Flange Plate |
Itinerary Range | Telescopic Amount ±20mm |
Skeleton | Cathodic Electrophoretic Diamond Wire Mesh |
---|---|
Typical Dimensions | Outer Diameter Φ250mm × Height Φ460mm |
Vibration Resistance Performance | 10 - 500Hz Sweep Frequency Vibration Test |
Filter Paper | Imported Composite Fiber Filter Paper |
Transportation Protection | Compressive Strength ≥ 500N |
System Linkage | Original Vehicle Pneumatic Door |
---|---|
Exhaust | Rotate The Handle By 90° |
Surface | Electrophoretic Primer |
Salt Spray Test | Over 1000 Hours |
Meet; Satisfy | GB 13094-2017 |