| Operating Temperature | Stable Operation In A Wide Temperature Range Of -40℃ To +85℃ |
|---|---|
| Durable And Reliable Characteristics | The Designed Service Life Of The LED Bead Is ≥3000 Hours. |
| Wiring Specifications | Original Factory Special Waterproof Connector |
| Core Structure | Integrated Fully Sealed Lamp Body Structure |
| Protection Grade | IP67 Dustproof And Waterproof |
| Vibration Test | 10 - 2000Hz Sinusoidal Vibration |
|---|---|
| Locking Torque | Rated Locking Torque ≥ 800N·m |
| Lubrication System | Food - Grade Silicone Grease |
| Material Composition | Aluminum Alloy Housing |
| Sealed Structure | Double - Lip Seal Design |
| Temperature Resistance Performance | Operating In A Wide Temperature Range From -40℃ To 125℃ |
|---|---|
| Speed Range | Operating Speed 600-6000r/min |
| Intelligent Adjustment | Built-in MCU Digital Regulator |
| Shell | Aluminum Alloy Die Casting |
| Electrical Performance | Rated Voltage 28V DC |
| Temperature Adaptation | Works In The Full Temperature Range From -40℃ To 120℃ |
|---|---|
| Material Composition | The Rod Body Is Forged From 40Cr Alloy Structural Steel. |
| Size Specifications | Center 137mm±0.5mm, Rod Diameter 20mm |
| Vibration Test | Pass The 10-2000Hz Random Vibration Test |
| Fatigue Life | After 200,000 Cycles Of Load Testing |
| Compatible Vehicle Models | Compatible With King Long XMQ6129, Higer KLQ6122, Foton AUV BJ6129, Etc. At The Same Time |
|---|---|
| Core Structure | Diaphragm-type Pressure Control Structure With Four Built-in Independent One-way Valves |
| Interface Specification | Air Inlet M22×1.5, All Four Air Outlets Are M16×1.5 |
| Protection Level | IP65 Dust, Oil And Water Resistance |
| Accessory Type | Four-circuit Protection Valve |
| Alarm Methods | Acoustic And Optical Alarm |
|---|---|
| Installation Method | Threaded Connection |
| Operating Temperature | -45℃ - +90℃ |
| Barometric Pressure Measurement Range | 0 - 1.2MPa |
| Service Life | ≥8 Years |
| Vane-type Hydraulic Pump | Efficient And Stable, With Low Noise And Long Service Life |
|---|---|
| Electric Drive | Powered By The Vehicle's High-voltage Battery |
| Motor Interface | High-voltage Waterproof Connector |
| Motor Speed | 3000-6000rpm |
| Original Factory Part Number | 2121-00041 |
| Installation Location | Suitable For Side-mounted Luggage Compartment Doors, Rear-mounted Luggage Compartment Doors And Engine Compartment Doors |
|---|---|
| Humidity Adaptation | No Rust In An Environment With Humidity ≤ 95% RH |
| Impact Resistance Strength | Lock Body Compressive Strength ≥ 800MPa |
| Lock Cylinder Configuration | Using A Copper Pin Tumbler Lock Cylinder |
| Temperature Tolerance | Operating Temperature -40℃~+85℃ |
| Maintenance Cycle | It Is Recommended To Check The Lubrication Status Every 20,000 Kilometers. |
|---|---|
| Installation Method | The Bearing Seat Is Connected To The Release Fork Via A Return Spring. |
| Main Material | The Outer Ring Is Made Of SUJ2 High-carbon Chromium Bearing Steel |
| Transmission Adaptation | Specially For Qijiang S6-90, S6-100, QJ805, QJ1506, Etc. |
| Interface Adaptation | Precisely Fits With The Groove Of The Clutch Fork |
| Cycle Life | 50,000 - 100,000 Repetitions Of Opening And Closing |
|---|---|
| Temperature Range | - From -40℃ To 85℃ |
| Itinerary | 10mm - 20mm |
| Good Compatibility | Various Buses |
| Shell | Metal/Plastic |