| Adapted Models | Specially Designed For Yutong And Other New Energy Buses As Supporting Components |
|---|---|
| Material Composition | The Bearing Is Made Of GCr15 High-carbon Chromium Bearing Steel. |
| Temperature Adaptation | Works In The Full Temperature Range From -40℃ To 120℃ |
| Strength Verification | After A Static Load Test With 1.5 Times The Rated Load |
| Bearing Assembly | Integrated With 6305RS Deep Groove Ball Bearing |
| Adapt | Youth, Yutong, King Long |
|---|---|
| Fatigue Test | More Than 80,000 Times |
| Material | Aluminum Alloy |
| Structure | Six-bar Linkage |
| The Lifespan Can Reach | 10 - 12 Years |
| Product Type | Bus Front Headlight Assembly |
|---|---|
| OE Number | 4101-00084 |
| Compatible Brand | Yutong |
| Lens Material | Polycarbonate (PC) |
| Housing Material | ABS Plastic |
| Anti-vibration Performance | 10g Acceleration Test. Passed ISO 16750-3 Road Vibration Test. |
|---|---|
| Thread Technology | Cold Heading Forming + Thread Rolling Treatment |
| Tensile Strength | 10.9 Grade High-strength Certification |
| Anti-jamming Processing | Molybdenum Disulfide Coating |
| Resistant To Low Temperature | -40℃ Anti-brittle Cracking |
| Connection Method | The Ball Head Pin Is Tapered And Matched With The Stabilizer Bar Support. |
|---|---|
| Compatible Vehicle Models | Yutong Models Such As ZK6120H/6118Y2/6805DX |
| Wear-resistant Design | Spherical Surface Hard Chromium Plating |
| Fatigue Life | 2 Million Times Of Swing Angle Cycles |
| Structural Design | Double Ball - Head All - Metal Joint |
| Surface Roughness | The Inner Wall Has A Surface Roughness Ra≤0.8μm, And The Outer Wall Has A Surface Roughness Ra≤1.6μm. |
|---|---|
| Inner Diameter | φ35mm φ40mm φ45mm φ50mm Can Be Customized |
| Install Tools | Special Hydraulic Sleeve Pressing Machine |
| Mainstream Adaptation | Yutong ZK6120H/6115BEV/6850 Series |
| Damping Coefficient | 10~15N・s/mm |
| Range | LED Model ≥200 Meters / Xenon Model ≥250 Meters |
|---|---|
| Quality Commitment | Inspection One By One, With A Pass Rate Of 100% |
| Packaging | Carton, Wooden Box, Custom Packaging |
| Shell | Aviation Aluminum Heat Dissipation |
| Illuminance Value | 20 Meters Away, ≥300 Lux. |
| Cross-model Compatibility | Can Directly Replace FAG Bearings Of The Same Specification |
|---|---|
| Failure Protection | The Impact Strength Of The Steel Cage Is ≥50J/cm² |
| Precise Adaptation | Designed Specifically For Bus Drive Motors |
| Main Material | SUJ2 High-carbon Chromium Bearing Steel |
| Model Parsing | 6216 Series Deep Groove Ball Bearings |
| Durability | High-quality Bearings And High-temperature Grease Ensure Long Life (TM Series Is Designed To Last 100,000 Hours) |
|---|---|
| Voltage | 24V/28V Dual Compatibility |
| Control Method | Digital Intelligent Control |
| Signal Input | PWM Speed Regulation |
| Thermal Deformation Coefficient | Low Recession Design |
| Crankshaft Material | 40Cr High Frequency Quenching |
|---|---|
| Applicable Scenario | Bus Air Conditioning System |
| Accessory Type | Air Conditioner Compressor |
| Sealing Technology | Laser Welding + O-ring |
| Packaging | Foam, Carton |