| Function | Precisely Detect The Vehicle Speed |
|---|---|
| Installation Location | Beside The Gearbox |
| Precision | Relatively High |
| Type | Hall Type |
| Voltage | 6.5 - 16V |
| Regulatory Function | Wind Speed Adjustment |
|---|---|
| Stability | The Signal Is Stable |
| Texture | Smooth, Frosted |
| Control Range | Applicable Area |
| Style | Minimalist Style |
| Durability Performance | The Design Life Of LED Chips Is ≥ 50,000 Hours |
|---|---|
| Light Source Type | Automotive-grade High-brightness LED Chips |
| Flash Mode | High-frequency Stroboscopic Flash |
| Material Composition | High-transparency PC Lampshade |
| Protection Level | IP67 Dustproof And Waterproof |
| Quality Commitment | Inspection One By One, With A Pass Rate Of 100% (supporting Attached Inspection Reports) |
|---|---|
| Packaging | Carton, Wooden Box, Custom Packaging |
| Model | AVi168SP3003.3701-02195 |
| International Certification | CE/IATF 16949+ISO 14001 |
| Low Noise Design | No-load Noise≤65dB |
| Packaging | Carton, Wooden Box, Custom Packaging |
|---|---|
| Material | NBR (acrylonitrile-butadiene Rubber) |
| Model | Guide Arm Bushing/rubber Bearing |
| Replacement Period | 80,000 - 100,000 Kilometers |
| Skeletal Material | Q235 Galvanized Steel |
| Packaging | Carton, Wooden Box, Custom Packaging |
|---|---|
| Wear Resistance | Wear Amount ≤0.1mm/100,000 Times. |
| Sphere Material | High-strength Vulcanized Rubber |
| Accessory Type | Stabilizer Bar Components |
| Model | Stabilizer Bar Bushing |
| Heat Treatment Process | Austempering + Low-temperature Tempering |
|---|---|
| Fatigue Life | Bench Test: No Cracks After 500,000 Cycles |
| Torque Bearing | Rated Transmission Torque ≥ 8000N・m |
| Speed Range | Maximum Operating Speed 4000r/min |
| Interchangeability | Compliant With SAE J1280 Standard |
| Fatigue Life | After 100,000 Compression Cycles, The Rebound Attenuation Is ≤ 3% |
|---|---|
| Medium Resistance | Resistant To Immersion In Engine Oil And Coolant For 168 Hours |
| Temperature Range | Operating In The Full Temperature Range From -40℃ To 125℃ |
| Friction Material | German Raybestos Composite Fiber Material |
| Shock-absorbing Spring | Oil-quenched And Tempered Spring Steel Wire |
| Light Source Type | Automotive-grade High-luminous-efficiency LED Chips |
|---|---|
| Circuit Compatibility | Directly Connect To The Original Vehicle's CAN Bus |
| Accessory Type | Integrated LED Combination Headlight |
| Durability Performance | LED Chip Design Life ≥ 50,000 Hours |
| Vibration Resistance Characteristics | Passed The 10g Vibration Test |
| Operating Temperature | Stable Operation In A Wide Temperature Range Of -40℃ To +85℃ |
|---|---|
| Durable And Reliable Characteristics | The Designed Service Life Of The LED Bead Is ≥3000 Hours. |
| Wiring Specifications | Original Factory Special Waterproof Connector |
| Core Structure | Integrated Fully Sealed Lamp Body Structure |
| Protection Grade | IP67 Dustproof And Waterproof |