| Life Expectancy Indicator | The Effective Service Life Of The Desiccant Is ≥ 80,000 Kilometers |
|---|---|
| Install Protection | The Recommended Intake Air Temperature Is ≤ 65℃ |
| System Compatibility | Match The Output Of The Electric Air Compressor |
| Handle Traffic | Rated Air Intake Rate 340L/min±10L/min |
| Desiccant Configuration | Composite Molecular Sieve Desiccant |
| Response Speed | Response Time To Sudden Air Pressure Changes ≤ 10 Seconds |
|---|---|
| Low-temperature Test | Stand Still For 48 Hours In An Environment Of -40℃ |
| Precise Matching | Original Factory Number 231500279 |
| Measurement Accuracy | Barometric Pressure Error ±0.1Bar |
| Main Material | PA66 + 30% Glass Fiber Shell |
| Energy Absorption Optimization | The Force Fluctuation During The Collapse Process Is ≤ 15% |
|---|---|
| Steering Response | The Transmission Delay Of The Steering Action Is ≤ 100ms |
| Connection Specifications | 79-tooth Spline At The End Of The Lower Steering Shaft |
| Weather Resistance Performance | Works In The Full Temperature Range From -40℃ To 85℃ |
| Installation Dimensions | Total Length Of The Pipe String: 680mm±5mm |
| Temperature Range | Operates In The Full Temperature Range From -40℃ To 140℃ |
|---|---|
| Oil Resistance Characteristics | Resistant To Diesel And Engine Oil Immersion For 168 Hours |
| Probe Material | 304 Stainless Steel Integrally Formed Probe Rod |
| Float Design | Oil-resistant PA66 + Glass Fiber Float |
| Accuracy Class | Measurement Error ≤ ±3mm |
| Temperature Compensation | Operating In The Full Temperature Range Of -40℃ To 125℃ |
|---|---|
| Vibration Resistance Performance | Pass The 5-2000Hz Random Vibration Test |
| Shell Material | 316L Stainless Steel Integrated Forging |
| Threaded Interface | M16×1.5 Standard Taper Pipe Thread |
| Salt Spray Protection | Neutral Salt Spray Test For 96 Hours |
| Fatigue Life | No Cracks After 500,000 Cycles Of Testing |
|---|---|
| Suspension Adaptation | Used In Air Suspension Systems |
| Itinerary Specifications | Axial Effective Stroke 55mm |
| Pressure Range | Working Pressure 3-8bar |
| Vibration Attenuation | Natural Frequency 2.8Hz |
| Heat Treatment Process | Austempering + Low-temperature Tempering |
|---|---|
| Fatigue Life | Bench Test: No Cracks After 500,000 Cycles |
| Torque Bearing | Rated Transmission Torque ≥ 8000N・m |
| Speed Range | Maximum Operating Speed 4000r/min |
| Interchangeability | Compliant With SAE J1280 Standard |
| Temperature Range Adaptation | Operates In The Full Temperature Range From -40℃ To 85℃ |
|---|---|
| Service Life | The Buckle Opening And Closing Cycle Is ≥ 50,000 Times |
| Static Strength | The Static Breaking Force Of The Webbing Is ≥ 22kN |
| Webbing Material | Woven From High-strength Polyester Fibers |
| Locking Parameters | Emergency Locking Acceleration ≥ 2.5g |
| Temperature Adaptation | Works Normally In The Full Temperature Range From -40℃ To 120℃ |
|---|---|
| Bearing Material | Made Of 42CrMo Alloy Steel Through Integral Forging |
| Size Specifications | Kingpin Adaptation Diameter φ52mm±0.02mm |
| Installation Optimization | Bushing Tape With 1:50 Taper Guide Section |
| Accuracy Class | Bearing Radial Clearance 0.015-0.03mm |
| Temperature Adaptation | Works In The Full Temperature Range From -50℃ To 150℃ |
|---|---|
| Material Properties | Adopt 42CrMo High-strength Alloy Structural Steel |
| Vibration Resistance | Passed The 5-2000Hz Random Vibration Test |
| Lightweight Process | Adopt The Cold Heading Forming Process |
| Corrosion-resistant Treatment | The Surface Is Coated With Dacromet. |