| Structure Type | Piston Structure |
|---|---|
| Working Medium | Compressed Air |
| Maximum Working Pressure | 0.8MPa - 1MPa |
| Valve Body Material | Aluminum Alloy |
| Durability | 100,000 Times |
| Package | Wrapped With Rust-proof Paper + Sealed With Polyethylene Bag |
|---|---|
| Wading Conditions | The Surface Is Sprayed With A Polytetrafluoroethylene Coating. |
| Torque Requirements | The Tightening Torque Of The Installation Bolt Is 80 - 100N·m |
| Size | Outer Diameter Φ85mm × Height 130mm |
| Anti-corrosion Coating | Metal Skeleton Cathodic Electrophoresis |
| Lubrication System | Long - Acting Lithium - Based Lubricating Grease |
|---|---|
| Working Principle | Double Universal Joint Transmission |
| Sealed Structure | Double Lip Fluororubber Oil Seal |
| Connection Method | Integrally Forged Flange Plate |
| Itinerary Range | Telescopic Amount ±20mm |
| Technology | Precision Machining With Ra≤0.4μm. |
|---|---|
| Applicable Scenario | Xiamen Golden Dragon Tourist Bus |
| Quick Adaptation | Multi-vehicle Compatibility |
| Response Speed | Millisecond-level Startup |
| Maintenance | Adjustment-free Design |
| Strong Fastening | Can Effectively Prevent Loosening. |
|---|---|
| Technology | Thickness Of Galvanized Coating |
| Packaging | Wrap Film, Bubble Film, Foam |
| Precision Machining | Fine Manufacturing Process |
| Tensile Strength | 1141~1164 N/mm² |
| Low Mutual Opening Rate | Key Code Uniqueness > 99.99% / Customizable Master Key. |
|---|---|
| Anti-prying Design | High-strength Lock Body Resists Violent Damage. |
| Stainless Steel Casing | Thickness ≥ 2mm, Anti-drilling And Anti-sawing. |
| Anti-corrosion Strengthening | Salt Spray Test: No Rust For More Than 720 Hours. |
| 3 Seconds Quick Start | Match The Emergency Needs Of Passenger Cars. |
| Bearing Type | Double Row Angular Contact Ball Bearings |
|---|---|
| Redundant Design | Dual-channel Signal Feedback |
| Accessory Type | Fan Electromagnetic Clutch |
| Drive Type | Rotating Coil Structure |
| Surface Treatment | Chromium Plating |
| Maximum Trampling Angle | ±30° (matching The Acceleration Characteristics Of Passenger Cars) |
|---|---|
| Reset Spring Force | 5N・m~15N・m (Simulate The Foot Feel Of Traditional Throttle) |
| Fail-safe Mode | Trigger Safe Idle Speed Or Limp Home Mode In Case Of Failure. |
| Pedal Force Feedback | Adjustable Damping |
| Accessory Type | Electronic Gas Pedal |
| Integrated Design | Pressure Regulating Valve + Safety Valve Integrated |
|---|---|
| Filtration Technology | Single Cylinder Drying Tower Structure |
| Regenerative Technology | Reverse Blowing Regeneration System |
| Oil-water Separation | Multistage Centrifugal Filtration |
| Shell Material | High Strength Aluminum Alloy |
| Corrosion Resistance | Salt Spray Test For 720 Hours (grade C5 Corrosion Protection) |
|---|---|
| Anti-accidental Stepping Design | Double Stroke Limit (to Prevent Floor Oil Misoperation) |
| Pedal Force Feedback | - Adjustable From 30-60N (adapting To Driving Style). |
| Durability | 2 Million Stampede Test (no Signal Drift) |
| Seismic Performance | 50G Impact Test (ISO 16750-2 Standard) |