| Fatigue Life | After 100,000 Compression Cycles, The Rebound Attenuation Is ≤ 3% |
|---|---|
| Medium Resistance | Resistant To Immersion In Engine Oil And Coolant For 168 Hours |
| Temperature Range | Operating In The Full Temperature Range From -40℃ To 125℃ |
| Friction Material | German Raybestos Composite Fiber Material |
| Shock-absorbing Spring | Oil-quenched And Tempered Spring Steel Wire |
| Dustproof And Waterproof | Prevent Dust, Oil Stains, And Liquids From Seeping Into The Gear Shift Mechanism |
|---|---|
| Full Product Name | Gearshift Dust Cover Three Flexible Shaft Assembly |
| Maintenance Convenience | The Dust Cover Can Be Replaced Separately. |
| Protection Level | IP54 Dustproof And Splash-proof |
| Service Life | ≥5 Years Or 1,000,000 Kilometers |
| High Temperature Stability | 250 ℃ High Temperature Compression Permanent Deformation Rate ≤ 1.5% |
|---|---|
| Temperature Range | -40 ℃ To 125 ℃ Full Temperature Range Operation |
| Carrying Capacity | Rated Transmission Torque 1200N ・ M |
| Identification And Traceability | Pressure Plate Hub Laser Etching Model |
| Main Material | HT250 Gray Cast Iron Material |
| E | Ground Terminal, Connected To The Vehicle Body Or Engine Housing |
|---|---|
| Shell | High-temperature Resistant Flame-retardant Plastic |
| F | Connect The Excitation Winding Of The Generator |
| B+ | Connect The Positive Pole Of The Battery |
| High-precision Control | Voltage Regulation Accuracy ≤ ±0.2V |
| Insulation Strength | No Breakdown Between Contact And Coil At AC 1000V For 1 Minute |
|---|---|
| Manufacturing Process | The Contact Points Are Welded Using Cold Pressure Welding. |
| Temperature Range | Operates In The Full Temperature Range From -40℃ To 125℃ |
| Fatigue Life | Mechanical Durability: 500,000 Times |
| Process Precision | Contact Gap Tolerance ±0.02mm |
| Material Composition | 20CrMnTi Low-carbon Alloy Steel |
|---|---|
| Working Frequency | 315MHz |
| Disassembly Tools | 33mm Hexagonal Socket |
| Dedicated | Brake Wheel Cylinder |
| Dynamic Response | Pull-in Time ≤ 30ms |
| Original Factory Number | 238202030 |
|---|---|
| Brand Certification | Original Accessories Of Xiamen King Long United Automotive Industry Co., Ltd. |
| Installation Method | Embedded Installation |
| Main Material | The Shell Is Made Of UL94 V-0 Flame-retardant ABS Engineering Plastic |
| Operating Voltage | DC 24V (±15%), Compatible With Vehicle-mounted Power Supply Systems |
| Motor Type | Permanent Magnet DC Motor |
|---|---|
| Material Composition | 20CrMnTi Low-carbon Alloy Steel |
| Size Specifications | Kingpin Adaptation Diameter φ52mm±0.02mm |
| Disassembly Tools | 33mm Hexagonal Socket |
| Communication Protocol | Supports The CANopen Protocol |
| Noise Reduction Design | Using A Silent Motor + Shock-absorbing Bracket |
|---|---|
| Locked-rotor Current | ≤25A, Built-in Thermal Protection Device |
| Motor | Permanent Magnet DC Reversible Motor |
| Climb And Descent Rate | 80-120mm/s, Stable And Fast |
| No-load Power | ≤30W, Low-power Design |
| Connector Specifications | Standard 36-pin Waterproof Connector For Vehicle Use |
|---|---|
| Lighting System Compatibility | Supports Jinlong Original LED / Halogen Headlamps |
| Communication Protocol | Compatible With J1939/CANopen Dual Protocols |
| Intelligent Management And Control | Integrated Automatic Light Control |
| Output Channel | 16 Independent Control Outputs |