| Long-life Design | Worm Gear And Worm Structure Has A Service Life Of More Than 500,000 Kilometers. |
|---|---|
| Precision Automatic Compensation | Real-time Detection Of Braking Clearance With An Error Control Of ±0.1mm. |
| Dynamic Load Balancing | Multi-round Synchronous Adjustment To Avoid Braking Force Deviation. |
| High Temperature Resistant Coating | Surface Treatment Can Withstand Braking High Temperature Of 300 ℃. |
| Free From Manual Adjustment | Eliminate Manual Adjustment Errors And Reduce Maintenance Costs. |
| Dustproof | Built-in Dust Cover To Prevent Sediment From Entering The Piston Chamber. |
|---|---|
| Temperature | Adapt To A Wide Temperature Environment From -40℃ To 120℃. |
| Adaptation | Precise Matching Of WABCO Clutch System |
| Material | High-strength Aluminum Alloy Shell |
| Withstand Voltage | Working Pressure Reaches 8 Bar. |
| Anti-vibration Performance | 10g Acceleration Test. Passed ISO 16750-3 Road Vibration Test. |
|---|---|
| Thread Technology | Cold Heading Forming + Thread Rolling Treatment |
| Tensile Strength | 10.9 Grade High-strength Certification |
| Anti-jamming Processing | Molybdenum Disulfide Coating |
| Resistant To Low Temperature | -40℃ Anti-brittle Cracking |
| Dust-proof Structure | Double-layer Fluororubber Sealing Cover |
|---|---|
| Fatigue Life | 2 Million Times Of Loop Loading |
| Vibration Test | 10~2000Hz Sine Vibration |
| Connection Method | Integrally Forged Ball Pin |
| Surface Treatment | Zinc-nickel Alloy Coating |
| Hydrogen Embrittlement Protection | After Pickling, Carry Out Dehydrogenation Treatment At A Constant Temperature Of 200℃ For 4 Hours. |
|---|---|
| Lubrication System | Long-acting Lithium-based Lubricating Grease |
| Installation Method | Press - Fit Quick - Release Structure |
| Maintenance Interval | 1 Million Kilometers Or 60 Months |
| Fatigue Life | 3 Million Times Of Loop Loading |
| Install Tools | Special Hydraulic Sleeve Press |
|---|---|
| Corrosion Resistance | Salt Spray Test ≥ 500 Hours |
| Surface Treatment | Outer Wall Phosphating |
| Oil Tank Design | 3 Spiral Oil Grooves |
| Execution Standards | QC/T 29097-2014 |
| Applicable Scenario | Bus Liquid Heater Water Pipe Connection Joint |
|---|---|
| Packaging | Carton, Wooden Box, Custom Packaging |
| Ageing Resistance | 1000h High Temperature Aging |
| Accessory Type | Warm Air Pipe Joint |
| Temperature | -40℃~125℃ |
| Control | Intelligent Temperature Control Start And Stop |
|---|---|
| Material | Aluminum Alloy Lightweight Shell |
| Safety | Overload Protection Mechanism |
| Protection | IP66 Dustproof And Waterproof |
| Mute | ≤ 60dB Low Noise Operation |
| Material | Fluorine Rubber (FKM) High Temperature Resistance |
|---|---|
| Medium | Oil Resistance/acid And Alkali Corrosion Resistance |
| Seal | Double Lip Dynamic Sealing |
| Pressure | Pressure Resistance 0.5MPa |
| Lifespan | 100,000 Hour Durability Test |
| Power Source | Hydraulic And Pneumatic Dual Power |
|---|---|
| Heat Recession Resistance | Continuous Braking Stability |
| Precision Assembly | Multi-point Smart Locking |
| Environmental Friendliness | No Mineral Oil Pollution |
| Ease Of Maintenance | Modular Disassembly |