| Master Cylinder Material | ADC12 Aluminum Alloy |
|---|---|
| Accessory Type | Clutch Master Pump |
| Suitable Models | XML6125series |
| Operating Temperature Range | ﹣40℃~+85℃ |
| Product Model | 21608AJ0013 |
| Smooth Treatment Of Inner Wall | Roughness Ra ≤ 1.6 μm, Pressure Drop Reduced By 20%. |
|---|---|
| Packaging | Carton, Wooden Box, Custom Packaging |
| Pulse Test | 100,000 Pressure Cycles |
| Metal Joint | Thicken The Pipe Wall |
| Accessory Type | Warm Air Accessories |
| Packaging | Carton, Wooden Box, Custom Packaging |
|---|---|
| Torque Recommended Value | Wheel Hub Screws 130-150N·m |
| Accessory Type | Wheel Nuts And Gaskets |
| Thread Type | M20×1.5、M22×1.5 |
| Washer | HV300 Hardness |
| Durability | High-quality Bearings And High-temperature Grease Ensure Long Life (TM Series Is Designed To Last 100,000 Hours) |
|---|---|
| Voltage | 24V/28V Dual Compatibility |
| Control Method | Digital Intelligent Control |
| Signal Input | PWM Speed Regulation |
| Thermal Deformation Coefficient | Low Recession Design |
| State | Brand New |
|---|---|
| International Certification | ISO 9001 |
| Waterproof Performance | Soak In Water For 30 Minutes |
| Material | Aluminum Alloy Shell |
| Supply Voltage | 12-24V Customizable |
| Packaging | Carton, Wooden Box, Custom Packaging,foam |
|---|---|
| Control | Internal And External Dual Modes |
| Structure | Impact-resistant Reinforcement |
| Material | High-strength Aluminum Alloy |
| Urgent | External Opening Is Possible. |
| Temperature Adaptability | Wide Temperature Range (-30℃~80℃) Operation |
|---|---|
| Operation Mode | Manual Override Mechanical Transmission |
| Wear Resistance | Low-friction Coefficient Coating Process |
| Transmission | Dual-cable Synchronized Push-pull |
| Adjustment | Telescopic Lever Length Adjustment |
| Low Friction Coefficient | Surface Phosphating Treatment, Coefficient Of Friction ≤ 0.12 |
|---|---|
| No Risk Of Hydrogen Embrittlement | Adopt The Low-temperature Tempering Process |
| Multi - Layer Anti - Corrosion Protection | Galvanizing (8 - 12μm) + Dacromet (6 - 8μm) |
| High Fatigue Life | After 1 Million Cycles Of Loop Loading Tests |
| Wide Temperature Adaptability | Operating Temperature - 50℃~150℃ |
| Speed Range | 45r/min (low Speed) / 65r/min (high Speed) |
|---|---|
| Motor Material | Aluminum Alloy Housing + Nylon Gears |
| Adapt To The Windshield Wiper Arm | Single-arm / Double-arm Type |
| Certification Standards | IATF 16949/GB/T 24348 |
| Environmental Temperature Range | -40℃~+85℃ |
| Lubrication Design | Automatic Lubricating Mechanism |
|---|---|
| Maintenance Cost | The Pump Sleeve Can Be Replaced. |
| Technical Certification | WABCO Global Standards |
| Product Model | 1604-00868 9700516080 |
| Sealing Technology | New Type Exhaust Valve |