Vibration Resistance Level | Passed The Vibration Test According To GB/T 2423.10. |
---|---|
General-purpose Interface | Adapt To 90% Of Passenger Car Seats |
Dynamic Shock Absorption Effect | High-frequency Vibration Filtration |
Accessory Type | Driver's Seat Shock Absorber |
Shock Absorption Form | Hydraulic Type |
Quality Commitment | Inspection One By One, With A Pass Rate Of 100% |
---|---|
Packaging | Carton, Wooden Box, Custom Packaging |
Noise Reduction Design | Non-metallic Elastic Bushing |
Overload Protection | Shear Pin Safety Structure |
Accessory Type | Bus Transmission Shaft |
Shock Absorption Characteristics | Metal Ball Hinge And Rubber Vulcanization Composite Structure |
---|---|
Temperature Resistance Range | Adaptable To All Climates From - 25℃ To 70℃ |
Installation Hole Configuration | 4 Holes Are Symmetrically Distributed Axially |
Dynamic Fatigue Life | 50,000 - Cycle Load Durability Certification |
Static Stiffness Parameters | 30000±15% N/mm Bearing Capacity |
Technical Source | Introduction Of Original Technology From Neoplan In Germany |
---|---|
Applicable Vehicle Models | Youth Neoplan JNP6137S And Other Full-bearing Bodies |
Main Body Material | Ethylene Propylene Diene Monomer Rubber |
Sealed Design | Sealed Cover Leak Prevention |
Service Life | 80,000 - 100,000 Kilometers |
Connection Method | The Ball Head Pin Is Tapered And Matched With The Stabilizer Bar Support. |
---|---|
Compatible Vehicle Models | Yutong Models Such As ZK6120H/6118Y2/6805DX |
Wear-resistant Design | Spherical Surface Hard Chromium Plating |
Fatigue Life | 2 Million Times Of Swing Angle Cycles |
Structural Design | Double Ball - Head All - Metal Joint |
Packaging | Carton, Wooden Box, Custom Packaging |
---|---|
Accessory Type | Auto Electrical Parts |
Applicable Scenario | Starter Accessories |
International Certification | CE/ISO 9001/DOT |
Size | Standard Size |
Master Cylinder Material | ADC12 Aluminum Alloy |
---|---|
Accessory Type | Clutch Master Pump |
Suitable Models | XML6125series |
Operating Temperature Range | ﹣40℃~+85℃ |
Product Model | 21608AJ0013 |
Smooth Treatment Of Inner Wall | Roughness Ra ≤ 1.6 μm, Pressure Drop Reduced By 20%. |
---|---|
Packaging | Carton, Wooden Box, Custom Packaging |
Pulse Test | 100,000 Pressure Cycles |
Metal Joint | Thicken The Pipe Wall |
Accessory Type | Warm Air Accessories |
Packaging | Carton, Wooden Box, Custom Packaging |
---|---|
Torque Recommended Value | Wheel Hub Screws 130-150N·m |
Accessory Type | Wheel Nuts And Gaskets |
Thread Type | M20×1.5、M22×1.5 |
Washer | HV300 Hardness |
Durability | High-quality Bearings And High-temperature Grease Ensure Long Life (TM Series Is Designed To Last 100,000 Hours) |
---|---|
Voltage | 24V/28V Dual Compatibility |
Control Method | Digital Intelligent Control |
Signal Input | PWM Speed Regulation |
Thermal Deformation Coefficient | Low Recession Design |