| Skeleton | Cathodic Electrophoretic Diamond Wire Mesh |
|---|---|
| Typical Dimensions | Outer Diameter Φ250mm × Height Φ460mm |
| Vibration Resistance Performance | 10 - 500Hz Sweep Frequency Vibration Test |
| Filter Paper | Imported Composite Fiber Filter Paper |
| Transportation Protection | Compressive Strength ≥ 500N |
| Packaging | Carton, Wooden Box, Custom Packaging |
|---|---|
| Surface Treatment | Galvanized Layer Thickness ≥ 8μm. |
| Materials | 40Cr Alloy Structural Steel |
| Fatigue Life | ≥1 Million Cycles |
| Working Temperature Range | -40℃~+85℃ |
| Suitable Models | Applicable To A Full Range Of Passenger Car Pneumatic Door Pump Systems. |
|---|---|
| Installation Form | Support Panel Embedded Installation Or Pipeline Docking Installation |
| Surface Treatment | Carry Out Galvanized, Dacromet Or Electrophoretic Anti-rust Treatment |
| Operating Temperature | Can Work In A Wide Temperature Range From -40 ° C To 125 ° C |
| Ease Of Disassembly | Quick Release Buckle Structure For Easy Disassembly |
| Packaging | Carton, Wooden Box, Custom Packaging |
|---|---|
| Structural Design | Precision Gear And Rack Transmission |
| Lubrication Method | Long-term Grease Lubrication |
| Materials | High-strength Steel Shell |
| Model | Steering Gear Assembly |
| Dual Frequency Superposition | High Frequency (400-500Hz) + Low Frequency (200-300Hz) |
|---|---|
| Durability Test | Continuous Operation For 100 Hours Without Failure |
| Packaging | Carton, Wooden Box, Custom Packaging |
| Surface Galvanizing | Salt Spray Test ≥ 720 Hours |
| Voltage | 24V (wide Voltage 18-32V) |
| Compatible Vehicle Models | Yutong Models Such As ZK6120H/6118Y2/6805DX |
|---|---|
| Storage Conditions | Dry And Light - Avoiding Environment |
| Fatigue Life | 1 Million Times Of Swing Angle Cycles |
| Structural Design | Double-ball Seat All-metal Joint |
| Disassembly Tools | 27mm Plum Blossom Wrench |
| Hydrogen Embrittlement Protection | After Pickling, Carry Out Dehydrogenation Treatment At A Constant Temperature Of 200℃ For 4 Hours. |
|---|---|
| Lubrication System | Long-acting Lithium-based Lubricating Grease |
| Installation Method | Press - Fit Quick - Release Structure |
| Maintenance Interval | 1 Million Kilometers Or 60 Months |
| Fatigue Life | 3 Million Times Of Loop Loading |
| Dustproof | Built-in Dust Cover To Prevent Sediment From Entering The Piston Chamber. |
|---|---|
| Temperature | Adapt To A Wide Temperature Environment From -40℃ To 120℃. |
| Adaptation | Precise Matching Of WABCO Clutch System |
| Material | High-strength Aluminum Alloy Shell |
| Withstand Voltage | Working Pressure Reaches 8 Bar. |
| High-strength Aluminum Alloy Cylinder Block | Dual Advantages Of Lightweight And Corrosion Resistance |
|---|---|
| Quick Installation | 2 Bolts Fixed. Replacement Completed Within 15 Minutes. |
| Silent Operation | Air Pressure Adjustment Noise Is Less Than 45 Decibels. |
| Accessory Type | Pneumatic Support Rod For Cabin Door/seat |
| Packaging | Carton, Wooden Box, Custom Packaging |
| Long-life Design | Worm Gear And Worm Structure Has A Service Life Of More Than 500,000 Kilometers. |
|---|---|
| Precision Automatic Compensation | Real-time Detection Of Braking Clearance With An Error Control Of ±0.1mm. |
| Dynamic Load Balancing | Multi-round Synchronous Adjustment To Avoid Braking Force Deviation. |
| High Temperature Resistant Coating | Surface Treatment Can Withstand Braking High Temperature Of 300 ℃. |
| Free From Manual Adjustment | Eliminate Manual Adjustment Errors And Reduce Maintenance Costs. |