| Structural Design | Three-layer Damping Composite Structure |
|---|---|
| Service Life | ≥8 Years / 800,000 Kilometers |
| Salt Spray Protection | Zinc-nickel Alloy Coating |
| Bench Vibration Test | 1 Million Loops |
| Temperature Resistance Range | -45℃~+130℃ |
| Material Composition | Steel Plate Skeleton + Natural Rubber Composite Structure |
|---|---|
| Protection Level | IP65 Dustproof And Splash-proof |
| Lightweight Design | The Overall Weight ≤ 1.2kg |
| Carrying Capacity | Static Load ≥ 500kg |
| Temperature Resistance Range | -45℃ To + 120℃ |
| Material Composition | The Cylinder Block Is Made Of 6061 - T6 Aluminum Alloy. |
|---|---|
| Pressure Range | Working Air Pressure 0.4 - 0.8MPa |
| Vibration-resistant Design | Pass The Random Vibration Test |
| Power Adaptation | Compatible With 24V DC |
| Intelligent Anti-pinch | Built-in Pressure Sensor |
| Material Composition | The Cylinder Block Is Made Of 6061 - T6 Aluminum Alloy. |
|---|---|
| Protection Level | IP67 Level Dustproof And Waterproof |
| Power Adaptation | Compatible With 12 - 24V DC |
| Response Speed | Startup Time ≤ 0.3 Seconds |
| Intelligent Anti-pinch | Built-in Pressure Sensor |
| Material Technology | The Shell Is Made Of ADC12 Aluminum Alloy By Die Casting. |
|---|---|
| Electrical Specifications | Rated Voltage 28V DC, Output Power 150A |
| Electromagnetic Compatibility | Radiated Disturbance ≤ 30dBμV/m |
| Speed Characteristic | Idle Condition (800±50r/min) |
| Efficiency Performance | Efficiency ≥ 88% At 75% Load |
| Intelligent Sleep | The Vehicle Automatically Enters Sleep Mode After Being Stationary For 15 Minutes. |
|---|---|
| Communication Specifications | Operating In The 433.92±0.05MHz SRRC Approved Frequency Band |
| Alarm Response | The Response Time For Rapid Air Leakage Detection Is ≤ 5 Seconds |
| Material Technology | The Shell Is Made Of PA66 + 30% Glass Fiber Reinforced Material |
| Protection Level | Sensor Body IP6K9K Dustproof And Waterproof |
| Temperature Adaptation | Operating In The Full Temperature Range From -40℃ To 85℃ |
|---|---|
| Environmental Design | Dacromet Coating Does Not Contain Hexavalent Chromium |
| Material Composition | Adopt Q345B Low-alloy High-strength Steel |
| Shock Resistance | Can Withstand 100g Half-sine Wave Impact |
| Vibration Test | Pass The 5-2000Hz Random Vibration Test |
| Intermittent Frequency Adjustable | The Intermittent Gear Of The Windshield Wipers Supports Stepless Adjustment From 3 To 15 Times Per Minute. |
|---|---|
| Environmental Adaptation | Stable Operation In The Full Temperature Range From -40℃ To 85℃ |
| Contact Resistance | The Contact Resistance Of The Core Contact Point Is ≤ 50mΩ |
| Insulation Performance | The Insulation Resistance Of The Switch Body Is ≥ 100MΩ |
| Warranty Service | Provide A 1-year / 100,000-kilometer Quality Guarantee |
| Core Structure | Threaded Installation + Ejector Pin Triggering + Spring Return |
|---|---|
| Accessory Type | Mechanical Transmission Neutral Safety Switch |
| Contact Type | Normally Closed (NC) Double Contact Design |
| Protection Level | IP67 Dustproof And Waterproof |
| Install Threads | M16×1.5 Standard Thread |
| Cost-Effective Solution | Provide Performance Equivalent To Or Even Better Than That Of The Original Factory At A Reasonable Price |
|---|---|
| Cold-Start Reliability | Ensure That The Heater Ignites Successfully In One Go Under Severe Cold Weather Conditions. |
| Consistent Fuel Flow | Ensure That The Heater Can Obtain A Stable Fuel Supply Under Various Operating Conditions |
| Precision Atomization | Core Function: Ensuring Complete Atomization Of Fuel To Achieve Efficient Combustion |
| High-Precision Manufacturing | Ensure That The Flow Rate And Injection Angle Of Each Fuel Injector Meet Strict Standards. |