| Environmental Resistance Performance | 720 Hours Of Neutral Salt Spray Test With No Corrosion |
|---|---|
| Fatigue Life | After 1,000,000 Cycles Of Load Testing |
| Buffering Performance | Preset 25% Compression Amount |
| Installation Method | Fixed By The Central Bolt |
| Load Capacity | Static Limit Load ≥ 50kN |
| Temperature Adaptation | Operates In The Full Temperature Range From -40℃ To 125℃ |
|---|---|
| Environmental Testing | -40℃ To 125℃ High And Low Temperature Cycle Test |
| Material Composition | The Main Body Is Made Of A356 Aluminum Alloy |
| Load Capacity | Static Torque Bearing Capacity ≥ 850N・m |
| Vibration-resistant Design | Built-in Rubber Shock-absorbing Bracket |
| Number Of Durable Uses | The Horn Button Showed No Failure After 500,000 Press Tests. |
|---|---|
| Weather Resistance Performance | Works In The Full Temperature Range From -40℃ To 80℃ |
| Acoustic Characteristics | The Sound Transmission Efficiency Of The Horn Is ≥ 95% |
| Protection Level | Overall, It Meets The IP6K5K Protection Standard |
| Shock Resistance | Can Withstand An Impact Energy Of 10J |
| 360° Multi-directional Adjustment | The Double-layer Blade Structure Supports Manual Adjustment Of ±45° Up And Down, And ±60° Left And Right. |
|---|---|
| Environmental Certification | The Material Meets The Requirements Of The ELV Directive |
| Material Composition | The Air Outlet Panel Is Made Of ABS Engineering Plastic. |
| Modular Integrated Design | The Air Outlet And The Speaker Are Integrally Formed. |
| Adaptable Voltage | Supports 12-24V Wide-range DC Power Supply |
| Automatic Activation | The Anti-theft Mode Will Start Automatically 30 Seconds After The Key Is Pulled Out. |
|---|---|
| Vehicle Model Coverage | Precisely Compatible With Higer KLQ6129, KLQ6850, And KLQ6115 Series Buses |
| Rated Voltage | Compatible With 24V Vehicle-mounted DC System |
| Gear Configuration | Four-speed Mechanical Positioning |
| Lock Body Material | PA66 Reinforced Nylon Shell |
| Insulation Strength | No Breakdown Between Contact And Coil At AC 1000V For 1 Minute |
|---|---|
| Manufacturing Process | The Contact Points Are Welded Using Cold Pressure Welding. |
| Temperature Range | Operates In The Full Temperature Range From -40℃ To 125℃ |
| Fatigue Life | Mechanical Durability: 500,000 Times |
| Process Precision | Contact Gap Tolerance ±0.02mm |
| Overload Protection | Automatically Relieve Pressure When The Air Pressure Exceeds 1MPa |
|---|---|
| Main Airbag Module | Provide Seat Suspension And Shock Absorption Function |
| Structural Strength | The Overall Design Load-bearing Capacity Is ≥ 200kg |
| Manual Adjustment | Control Knobs Are Set On The Side Of The Seat. |
| Lumbar Support Airbag | Made Of Medical-grade TPU Material |
| Panel Material | High-strength PC+ABS Engineering Plastic |
|---|---|
| Service Life | Design Life ≥ 10 Years / 500,000 Kilometers |
| Automatic Mode | Built-in PID Intelligent Algorithm |
| Air Volume Control | 5-speed Wind Settings |
| Display System | LCD Display Screen |
| Type | Air Conditioning Compressor Pulley / Cooling Fan Drive Pulley |
|---|---|
| Bearing Specifications | Built-in 6203-6306 Series Deep Groove Ball Bearings |
| Original Factory Model | 29XG5-35501/HFF6123K40 And Other Series |
| Material | High-strength Cast Iron |
| Operating Temperature | -40℃~120℃ |
| Core Structure | Dual-coil Electromagnetic Control + Friction Plate Clutch Mechanism |
|---|---|
| Material Composition | High-strength Cast Iron Shell + Aluminum Alloy Heat Sink Plate |
| Accessory Type | Rear-mounted Three-speed Electromagnetic Fan Clutch |
| Torque Output | Maximum Transmitted Torque ≥ 180N・m |
| Suitable Shaft Diameter | Standard 38mm/42mm Two Specifications |